besides the turbocharger itself, what do i need to mod in order for it to run properly and handle the extra power.
2006-12-12 11:55:18 · 4 answers · asked by thatdude 2 in Cars & Transportation ➔ Maintenance & Repairs
Generally, you need to reduce the static compression ratio, make sure the lower end bearings can handle the increased loads, and increase the cooling system capacity.
Outside of the engine, can the drive train take the increased power and is the chassis (tires, suspension, etc.) up to the increased stress?
2006-12-12 13:45:42 · answer #1 · answered by young_at_heart_05 2 · 0⤊ 0⤋
relies upon on the vehicle. you will could desire to alter your exhaust and intake systems no remember what even with the undeniable fact that. As for having the especially exchange the manifolds it somewhat is going to very much count on the place you place interior the rapid. Throttle physique shouldn't could desire to be touched even with the undeniable fact that.
2016-12-30 08:07:04 · answer #2 · answered by bruss 3 · 0⤊ 0⤋
the engine should have good, even compression, good oil pressure and a top notch cooling system, you will want excellent brakes,you will want to wrap your "hot side "piping in some hi temp insulation,and have the input from the turbo system designers as to sizing and waste gate data.good luck ,dont speed LOL
2006-12-12 13:00:14 · answer #3 · answered by sterling m 6 · 0⤊ 0⤋
You didn't say what motor and at what boost you intend to operate at.
2006-12-12 11:59:07 · answer #4 · answered by mad_mav70 6 · 0⤊ 0⤋