English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

battery checks ok but will not start or evin try and turn over. my father in law says clutch switch i think starter.

2006-12-12 08:20:28 · 3 answers · asked by heavy d 1 in Cars & Transportation Maintenance & Repairs

3 answers

look on the top on the clutch petal you will see a push switch coming throught the firewall

2006-12-12 08:22:48 · answer #1 · answered by Lg 4 · 0 0

The clutch switch should be on the clutch pedal or around it. Look for a button type switch on or near the clutch pedal. The pedal has to trigger this switch when the clutch is pushed to the floor So look for a switch along the pedal shaft. Once found test for powers and grounds If you can bypass the switch loop a wire from one connector outlet to the other a try to start the truck. If it starts you need a switch if not look to th starter again test the power is getting to the start Test for power to the main terminal and to the s or solenoid terminal The big being the main and the other about half the size of the first is the s or solenoid. HOpe I hepled good luck

2006-12-12 16:31:01 · answer #2 · answered by Rudedude 4 · 0 0

he may be talking about the starter motor solenoid which sits on top of the starter to check you need to hold key in start position and have someone hit the solenoid with a bar and hammer or what ever you can get in there or test for power to the small exciter wire with key in same position if you have power there its probable that the solenoid is stuffed. if you have a clutch inhibitor switch its located on the pedal box behind the clutch pedal a quick test for that is to just bridge the two wires going to the switch and try starting.

2006-12-13 04:33:13 · answer #3 · answered by colin b 2 · 0 0

fedest.com, questions and answers