To clean my shower
2006-12-12 06:47:22 · 10 answers · asked by chosen_isaiah61 3 in Home & Garden ➔ Cleaning & Laundry
It will gas you to death. NEVER USE AMMONIA WITH BLEACH. If you mean muratic acid, it is for pools and being diluted in thousands of gallons of water, not cleaning showers.
Use something for the job. Tilex does a good job on my shower. Or if you have a mildew problem, use a sponge mop and mop bleach onto the walls and let it soak before you rinse it down. DO NOT use anything else until you rinse it thoroughly. Mixing cleaning products is EXTREMELY DANGEROUS. Please be careful.
2006-12-12 06:57:06 · answer #1 · answered by ? 7 · 1⤊ 0⤋
You'll pass out from the ammonia and bleach gas before you even get to the alcohol and meriadic acid. You might spill the acid as you fall to the floor and burn a hole in the bath mat or a swatch of your skin. I don't know, I don't have time to look up what meriadic acid is, but it sounds very nasty. You'll likely hit your head hard when you hit the ground and might get a scrape, but you could be lucky and have the alcohol spill on the scrape which would disinfect the wound.
The person who found you could throw the water in your face and see if it revives you, but the chances are not good... not good at all.
Try baking soda. It cleans the shower really well and is non-toxic.
2006-12-12 14:57:11 · answer #2 · answered by Dr. Obvious 4 · 1⤊ 0⤋
If you actually try to do this i suppose we won't be getting anymore questions from you ever again. And just what is it in your shower you are trying to clean? Is the grout moldy? Hard water stains? Just nasty muck in general?
If hard water stains..use white vinegar, if black moldy grout..try mixing a paste of bleach and baking soda...the paste keeps the bleach in place to kill the mold and the baking soda will also help with the cleaning and smell...put on with a paint brush leave on for half an hour and then use a scouring brush to finish it off with.
But under no circumstances what so ever mix one chemical with another unless you are a PHd in Chemistry and are in a actual laboratory. Normal cleaning supplies or what i have mentioned above and elbow grease are what works best.
2006-12-12 16:40:34 · answer #3 · answered by swt_tulips 2 · 0⤊ 0⤋
Amonia and bleach is what the Nazzis used to gas the Jewish people. Muriatic acid strait would work, be sure to wear HazMat clothingn. Rubbing alcohol and water? Not caustic enough. Try Mr Clean Magic Eraser instead.
Thanks for the giggle though!
2006-12-12 14:53:44 · answer #4 · answered by reynwater 7 · 2⤊ 0⤋
Try this cleaning cloth. You have to buy in packages of 5 but they are only like $3 bucks a piece. I have ordered them and use them on everything, especially cleaning windows and clean mirrors. They are made out of tiny fibers. They are guaranteed not to scratch and all you do is rinse the cloth under water, wring it out and wipe ANY surface with no streaks or scratch. Use em over and over. I have not thrown one away yet!
I even waxed my car with it! I am sold on this ...I encourage you to try it out.
www.eazeeclean.com
2006-12-12 16:56:22 · answer #5 · answered by Anonymous · 1⤊ 0⤋
You will make an extremely toxic gas. You will be alot better off going to the store and buyng scrubbing bubbles or something like it than making a cleaner yourself.
2006-12-12 14:50:54 · answer #6 · answered by Anonymous · 1⤊ 0⤋
If you don't singe your lungs, you will most likely develop pneumonia, not to mention a severe migraine headache! Read the warning labels on the products you use.
2006-12-12 23:17:52 · answer #7 · answered by desta 2 · 1⤊ 0⤋
It will form smoke and toxic gases that will kill your lungs.
And the mixtures will harm the drain pipe going down .
2006-12-12 18:41:43 · answer #8 · answered by StarShine G 7 · 1⤊ 0⤋
I hope you're joking. Use a commercial cleaner instead and don't ever mix them either.
2006-12-12 14:56:18 · answer #9 · answered by vmmhg 4 · 2⤊ 0⤋
Are you suicidal?
2006-12-12 14:56:36 · answer #10 · answered by JOYCE M 3 · 0⤊ 0⤋