what can i do for my basement walls they have mold and are damp can i get some ideas anyone?

Question

the walls are concrete and when i solve my problem can i just paint the walls

Answer 1

The remedy depends on the problem. Are the walls continually damp, or just after a rain? The problem must be corrected prior to dealing with the painting and mold removal. Make certain there are gutters on the roof eaves with downspouts that expel the water at least five feet away from the foundation. The grading around the house should also be adequate to expel the water from the foundation. If these items are in place, you don't necessarily have to dig up the foundation ( which can run around $10,000).

Contrary to what others are saying, bleach will not effectively "kill" the mold. The mold must be removed and moisture controlled to assure a clean, safe environment. After the walls have been cleaned, make certain they are completely dry prior to painting. Visit www.horizon-inspections.com for more information regarding foundations and mold issues. Feel free to e-mail me or call and I will help in any way I am able.

Hope this helps

Answer 2

You may have to dig around the foundation and put in a weeping tile along the footings. Then put on a water barrier on the outside walls. Make sure all the water from your drain pipes is carried away from the house and the ground slopes away from the house. Then move inside and use bleach mixed with water to clean off the mold. Use a really good primer like Kilz and buy a paint with a moldicide in the paint so the mold has less chance of coming back. Then buy a dehumidifier to make sure the basement stay dry. This should fix all your moisture problems.

Answer 3

If you really want to fix the problem, you will need to dig up the yard outside the basement down to a foot below your basement floor. Clean the outside walls off and apply a good coal tar epoxy coating to the exterior walls to a height of 6" above your natural grade. Make sure to pay special attension to the joint between the wall and the floor. Then, install a french drain around the house (with a place for it to drain to away from the house). Now backfill your excavation, and be sure to make the soil slope away from the house.
Inside, after you complete the above work, scrape the walls as clean as possible. Apply a bleach solution to kill any remaining mold (may require multiple applications. Allow wall to dry for 5-7 days, then apply a waterproofing paint to the inside of the basement.

Answer 4

basement gets damp due to water ingress from the neighbouring area and also from the structures above it like toilets bath room kitchen etc where water spillage is there if it is due to water table then u will have to get all round the external border of basement keepin gin mind that u will not be destabilising the structure and water proof the wall and fill the area back either with soil and top it with concrete if escavation is not possible due to any reason then you have to settle with temproary solutions like grouting the wall with cement slurry to fill in the possible voids and top coat with epxy or polyurethane coatings after the wall get completly dried.
the other possibility for water ingress will be due to presence of foriegn materials like leads wires, wood, cloth piece etc in concrete which can draw water and make the surface damp once the surface gets dried and coating is done molds may not come back

Answer 5

Clean the walls with bleach and water, Go to Home Depot , or a good paint store , A paint is sold to coat the wall to stop the water from seeping through.

Answer 6

Bleach bleach and more bleach to kill the mold. Remeber that this only kills the surface mold. To truely get rid of the mold, you are going to need to take down the walls, bleach behind the walls and put up new walls. Mold is a horrible thing.

Answer 7

Check outside gutters. These not working properly can cause water to leak in the basement.

Depends on how your home is positioned on the property. I have no water problems in my basement because I live at the top of the hill and the rest of my property is sloped down. Water has a natural place to flow.

Answer 8

one million- you could envision the source of moisture. maximum oftentimes, that's water that runs in direction of the domicile throughout rain. next time it rains, pass out and seem for the way the water is draining, for factors of status water. to end this, there are some suggestions. in case you have gutters, upload drainage pipe (that black, versatile stuff) to the downspouts, bury it some foot deep, and run it 10 -15 ft far off from the domicile. No gutters? - build up the section next to the beginning place with dirt so as that water won't stand on the element of the domicile. some shrubbery additionally helps with soaking up water. as quickly as you get the water concern solved, you could clean the partitions up and prepare to end them with drywall or paneling. that's additionally the source of the moist flooring. Sand the previous paint off and get a very good concrete or storage paint. The domicile windows? you will purely could chip and chisel that previous cement away that serves because of the fact the window end. the secret's to empty the water far off from the domicile. that's the source of ninety 8% of water issues in rooms that are below grade. That white powdery stuff is mineral salts that are left while the water dries up.

Answer 9

bleach the walls, and maybe put in a damp proof line along bottom of wall, then dry out cellar.

Answer 10

u can get a paint on dmp paint i.e damp profing paint
its good gear u can get it from any good building shops