I'm trying to find the code scanner connection on a 1990 buick la saber?

Question

Doe's any one know where to plug in to the computer on my buick so i can find the codes to fix it?

I look under the dash on the driverside and under the hood someone told me it doesnt have one i know it does but where?

Answer 1

Drivers side right side of the steering wheel I believe You need to look for a plug in that resembles a harmonica

Answer 2

If you go here------>

http://autorepair.about.com/library/ts/obd-i/bl-dtcs-73.htm

...and scroll down below the DTC description chart, there is an illustration of what the plug looks like. It is below the dash, on the edge of the bolster above the throttle.
You don't need a scanner to read the codes. Follow the procedure discussed on the page. All it requires is a paperclip.
When you manage to retrieve all the codes stored, refer to the chart for ther meaning. Then refer to a repair manual for proper diagnostics. Don't ASSuME that a code referring to a circuit or system indicates that that component must be defective. It MAY indicate that something else is causing input to be in error.

Good Luck and Merry Christmas

Answer 3

The connector should be located along the bottom of the dash on the drivers side .But seen as this is where your feet go in and out lots are broken off so stick your head where your feet go and start lookin good luck

Answer 4

you got one between the dash and center of the hump
just sit in drivers set and and slump down to the right the connector is just above the floor