you wont get into it with a torch, a safe is made up from layers of different metals , concrete and metal shavings. all the metals burn at different heats and the shavings will blow back at you, you need to use a hammer and chisel and go through the back of the safe, its the week est part. good luck, we spent 2 days opening 1 once, there was on paperwork in it.......gutted.
2006-12-11 06:10:44
·
answer #1
·
answered by Anonymous
·
1⤊
0⤋
i dont have a penis, yet im confident that the alcohol that's maximum of what's on an oxy pad is going to sting like hell. merely wash it, save it clean, clean underclothes etc. and if it retains up use some thing extra like a lotion than a harsh pad. (perhaps clearasil) in case you're a virgin that's in all possibility merely hormones going loopy.
2016-12-30 06:40:42
·
answer #2
·
answered by melvina 3
·
0⤊
0⤋
Torch from the side of the safe, so you just melt the door mechanism and hinges, and the flame does not go into the cavity of the safe itself.
2006-12-11 06:05:45
·
answer #3
·
answered by eric 2
·
1⤊
0⤋
if your trying to open the safe, there is a better way. A locksmith that is a safe mechanic knows exactly where to drill (depending upon model of safe) to open it. Cost will be about $300
2006-12-11 06:05:44
·
answer #4
·
answered by Anonymous
·
0⤊
1⤋
Drill it first, fill it with water & re-seal it
Of you could use jelly on it. Not raspberry.
Read "Surely you must be joking, Mr Feynman", a biography
of a nobel physicist/safe cracker/bongo champion.
2006-12-11 06:06:29
·
answer #5
·
answered by Anonymous
·
1⤊
0⤋
Avoid pointing it at the safe
2006-12-11 06:05:40
·
answer #6
·
answered by Scotty 7
·
1⤊
0⤋
Get to the money before it gets to the safe.
2006-12-11 06:04:47
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
start at the top... open in all the way around instead of trying to do it around the door... only the top later of money will be burnt, but there should be plenty thats ok.
not that I know or anything... im just saying.... yanno... if I were to do it...
2006-12-11 06:06:13
·
answer #8
·
answered by Anonymous
·
1⤊
0⤋
better to get a safe cracker and give him a cut. you also need to get some good henchmen that arent stupid -they always **** up the best laid plans
2006-12-11 06:19:47
·
answer #9
·
answered by Mr Cynical 5
·
0⤊
0⤋
do it under water so the temp doesn't reach the 454 degree kindling point of paper
2006-12-11 06:07:31
·
answer #10
·
answered by TheDoctor 6
·
1⤊
0⤋