Bought a little Art Deco trolley from an auction without looking at it first (bad move I know). There's a lot of whitening of the varnish on the top - is there any safe, easy way of getting rid of it or does it have to be a job for a professional furniture restorer ?
2006-12-10 23:46:36 · 6 answers · asked by beb 3 in Home & Garden ➔ Maintenance & Repairs
If this piece is finished with shellac then you need to use a method known as french polishing to restore the finish.
Shellac has an alcohol base and when it gets moisture on it, it turns white or cloudy. French polishing uses alcohol to restore the original luster.
check out:
http://www.woodfinishsupply.com/GuideToFrenchPolishing.pdf
2006-12-11 02:58:14 · answer #1 · answered by oil field trash 7 · 1⤊ 0⤋
I would think that you will probably have to have a complete new veneer surface. I have a 30's-40's commode that is in similar condition. This was our fault, putting coffee cups on it etc. You could try sanding very carefully and then re-varnishing, but don't forget that the veneer is going to be very thin. Also, make sure that you know what caused the problem in the first place - at least that way you can avoid it happening again.
2006-12-11 00:15:18 · answer #2 · answered by Anonymous · 1⤊ 1⤋
White Heat Marks and Water Rings on Wood Furniture: If the wood has a good finish (don't try on bare wood), mix equal parts of baking soda and regular white, non-gel toothpaste. Lightly dampen corner of a clean, soft white cloth with water and dip into the paste. With circular motion gently buff the marks for a few minutes. Wipe area clean, and buff to a shine. Follow with furniture polish. (If rings remain after buffing five minutes or so, they may have penetrated the wood; you might have to refinish the piece). If that doesn't work, dip a cloth in vegetable oil, then in cigarette ashes, then rub it over the mark. Another method is to rub real mayonnaise onto the stain, allow to sit overnight, then wipe with a dry towel.
2006-12-11 01:45:32 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Try Howard's(Restor.A.Finish) With a simple wipe-on, wipe-off process, most finished wood surfaces that seem to need a refinishing job can be completely restored in a few minutes. White heat rings and water marks, sun fade, oxidation, smoke damage, and most other blemishes can be quickly eliminated. Before you go to the extreme of stripping it, try restoring it! Can be purchased at Lowe's or any Hardware store.
2006-12-11 16:31:16 · answer #4 · answered by koi 3 · 0⤊ 0⤋
B and Q do a heat stain remover for wooden furniture, and it's really good. It's a foam that you rub in with a cloth. Can't remember the name, sorry, but go to the wood treatment aisle. It's a small, cream coloured, pressurised tin of foam! If you're from the USA, try your local DIY store.
2016-03-13 05:39:56 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Hi,
Try cigarette ashes if you smoke or know someone who does.
Add a little water to the ashes and make a paste. Rub a little on the spot and wait a few minutes and wipe off with a soft rag.
If it does the job you want continue until it's done
John
2006-12-10 23:52:42 · answer #6 · answered by telwidit 5 · 0⤊ 0⤋
Many of the home remedies mentioned will work.
Got lazy & tried a "Formby's" kit on a small desk ( not the finest piece in theworld but in good shape) in similar condition.
Came w/ a cleaner, "restorer" & polish.
Surprisingly good results with just the cleaner so I gave entire desk the full treatment.
Did not restore the original high gloss, but Im happy with it.
Good luck.
2006-12-17 13:01:37 · answer #7 · answered by Anonymous · 1⤊ 0⤋