I have a bottle with an image printed on it and I have tried everything to remove it (nail polish remover, paint thinner, lacquer thinner, sandpaper, etc.) and nothing works. Any suggestions on some industrial strength solvent or technique I could use to get it off? Thanks!
2006-12-10 19:39:40 · 4 answers · asked by papayas 2 in Home & Garden ➔ Do It Yourself (DIY)
I actually tried a fine sandpaper and eventually got it off, though with scratches on the bottle. Unfortunately the other methods did not work. Thanks anyway for your help!
2006-12-11 15:03:18 · update #1
If you get another one try using max-strength oven cleaner. I saw this used by a motor dealer on the side of a van which had been sign-written.
2006-12-12 08:29:32 · answer #1 · answered by Anonymous · 0⤊ 0⤋
Try using a razor blade and Windex. Make sure that the razor is brand new ( a old blade may scratch the bottle ) spray the bottle with Windex and scrape up and down on the bottle. Hold the horizontal and almost flat against the bottle this should work. Keep spraying Windex as you scrape. That will also keep you from scratching. Good Luck.
2006-12-11 02:27:16 · answer #2 · answered by johnnyandelly 2 · 0⤊ 0⤋
Go to the craft store and get glass etching paste. apply as directed.
2006-12-10 23:02:00 · answer #3 · answered by aussie 6 · 1⤊ 0⤋
If the botter is not the so expensive, try to buy a new one.!
2006-12-10 20:07:32 · answer #4 · answered by melvinsyc 2 · 0⤊ 1⤋