200-Pin DDR2 SO-DIMM DDR2 533 (PC2 4200) Notebook Memory
Dell Inspiron e1505 - Already got 1GB want to upgrade to either 512MB or another 1GB
Any suggestions as to WHERE i can buy this for a cheap price but at the same time, good stuff?
***Check back here in case i add details thanks!
2006-12-09 05:30:44 · 6 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Laptops & Notebooks
Well, that depends on how the motherboard is already populated. If you have a single 1GB module in there then get another 1GB module. If you have two 512MB module then you can do one of two things. You can swap out one of the 512MB for a 1GB or you can just replace them all with 1GB modules.
Whatever the case your best bet is with (in order of my preference):
http://www.newegg.com/
http://www.tigerdirect.com/
http://www.mwave.com/
http://www.zipzoomfly.com/
It's always best to have matched pairs of memory for optimal performance.
2006-12-09 05:42:46 · answer #1 · answered by conradj213 7 · 2⤊ 0⤋
RAM and memory are oftentimes an identical situation. i visit anticipate that by memory you're touching on the puzzling rigidity's means. First, you need to be sure in the journey that your computing device makes use of DDR or DDR2 RAM. you may receive a software like AIDA32 which tells you all kinds of training about your computing device's elements. If it really is DDR, i visit anticipate that you're on XP, and subsequently might want to apply a minimum of 1GB of RAM. the better the clock % the further perfect, for DDR 333MHz is quickly. once you've DDR2 and use XP, I nonetheless recommend the 1GB. attempt to search for RAM clocked at 800MHz for the perfect overall performance. in case you run Vista, then 2GB is my suggestion. There also are different issues to guage at the same time as procuring RAM, like the CAS latency, yet because you're probable an common person it quite received't concern you. As for puzzling drives, they're quite person-friendly to opt for and maximum grant similar overall performance. in the journey that your computing device is a few years previous it probable makes use of the IDE cable interface, it truly is a ribbon that connects the HDD to the motherboard. if that's the case, be confident to get an IDE HDD. the different format is SATA, it truly is a much smaller connector that resembles a strip with a notch at one end. it truly is swifter, yet as well more recent. do no longer purchase this in the journey that your computing device has no SATA ports.
2016-11-25 01:04:25 · answer #2 · answered by rocca 4 · 0⤊ 0⤋
go to www.crucial.com and run their scanner to see what you already have and how much you can add.
If its a dell, more than likely you have two 512MB memory modules already installed to make 1 GB. If you want to add more you will have to remove at least one of the existing modules.
The scanner at crucial.com will give you all the information you need.
2006-12-09 05:35:10 · answer #3 · answered by thunder2sys 7 · 1⤊ 0⤋
Don't go to dell. They make a good cheap low end computer but they always overcharge on hardware upgrades.
2006-12-09 05:51:11 · answer #4 · answered by Anonymous · 1⤊ 0⤋
Try this site
http://stupidcheapcomputers.net/
2006-12-09 05:38:23 · answer #5 · answered by Learning_Computer25 2 · 0⤊ 1⤋
go directly to the maker, there your best bet.
2006-12-09 05:36:40 · answer #6 · answered by harry rav 2 · 0⤊ 1⤋