For ease, you should buy a Cable wireless Router - This will also give you up to 4 ports for wired connection but also the wireless connection.
Make sure you buy the CABLE version and not the ADSL (BT) version because they are very different.
2006-12-08 22:45:11
·
answer #1
·
answered by Robert W 5
·
0⤊
0⤋
First-no reason to use 2 routers. Many wi-fi routers have a hard line port or 2, to attach to your desktop via a cat5 patch cable, as well as provide wireless access for your laptop. Be sure to read the manual that comes with the wi-fi router and change the password from it's generic setting. You can also specify your unique MAC address as the only one to be granted access- unless of course you don't mind sharing your internet with whomever is nearby and wants to hack in.
2006-12-08 22:51:44
·
answer #2
·
answered by Lou... 1
·
0⤊
0⤋
I would simply REPLACE the old router with the new wireless router. You won't need the old one any more, since the new wireless router will have everything that your old one has, PLUS more. The wireless router also has wired ports in the same way.
So it would be:
outside cable line>wireless router>desktop.
2006-12-08 22:49:30
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
I would recommend you to replace your broadband router with a modem wireless router. You can setup ethernet connections (most of modem wireless routers now a days has 4 ethernet ports) and wireless connections on this type of device.
Contact your ISP and ask them if you can have it replaced. It would be best to purchase the device from your ISP so that they would be able to support you if in case you will be having technical issues or something... good luck!
2006-12-09 16:34:17
·
answer #4
·
answered by Anonymous
·
0⤊
0⤋
That's a very good question.
First of all, buy a Cisco Wireless router. 40$ at Walmart
Plug it into your Cable Modem --> Router --> Desktop
You will have wireless automatically anyways BUT!!! Do not forget to put a SECURED PASSWORD!
Or else other people in your area can use your internet and might even get into your FILES.
Check the Booklet when you get it. (It's easy) Just put a Password protection and you're GOOD TO GO
You do not need your old router, cords etc.
2006-12-09 00:12:11
·
answer #5
·
answered by The cable guy 3
·
0⤊
0⤋
It looks such as you at the instant are not connecting good to the instant community. A under pressure connection works because of the fact the router is hooked as much as the internet and the twine is a, extra or much less, assured connection to the router. The instant connection isn't waiting to hire an address from the router the two because of the fact the router isn't serving addresses to instant consumers or because of the fact the authentication between your computing device and the router failed. this could be particularly undemanding so which you will restoration, presented you recognize the final community key (WEP or WPA/PSK) on your instant community. you need to use your under pressure connection to locate those out or you could inspect the label on the router once you're particular they have not been replaced from the producing facility settings. First disconnect the twine and then delete the instant connection settings that are already set up. we will set them up lower back dynamically - Your style of router has an 'N connect' or WPS button on it which you will might desire to press basically when you hook up with the instant community for the 1st time. locate your instant community via surfing for it decrease than the tray icon (close to the clock on XP / Vista) and double click it - supply it the protection passphrase it asks for and press the N connect button on your router whilst your computing device tries to connect. on the different hand persist with the learning interior the link decrease than in case you have the CD which shipped which include your router.
2016-12-11 05:28:02
·
answer #6
·
answered by ? 4
·
0⤊
0⤋
http://www.windowsnetworking.com/articles_tutorials/Troubleshooting-Wireless-Network-Connections.html
http://www.techtutorials.net/
2006-12-08 23:42:06
·
answer #7
·
answered by george r. n. 5
·
0⤊
0⤋