I have a 95 BMW 740 I, by looking for the spaek plugs to replace them ,,I could not find them . please help
2006-12-08 13:49:01 · 6 answers · asked by sal r 1 in Cars & Transportation ➔ Maintenance & Repairs
i own a repair shop,and if you,ll follow the plug wires you,ll see these run under a cover that you have to remove to gain access to them,,once that is removed ,,you can get to them real easy,,just take your time,,there not that bad to do,,just don't get in a hurry with it,,good luck,i hope this help,s,,have a good x-mas.,,PS be sure and gap them correctly.
2006-12-08 13:58:29 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
It's not bad, but just be careful removing the center cover. I can only imagine the number of covers broken by people just pulling them off. There are 2 types. One has seal caps and fasteners and the other has press studs. If you plan on doing the work yourself, like was mentioned, take your time and don't forget the ground straps on a few of the coils. You will see them when you do it.
2006-12-08 14:16:10 · answer #2 · answered by Marc87GN 4 · 0⤊ 0⤋
Buy the repair manual and follow it to the letter, it's the only safe way to fix a car, even if you are a average mechanic. Otherwise just pay because you can mess up a car bad if you screw up that job. and that would cost you 1,000's
2006-12-08 13:57:16 · answer #3 · answered by whajd 3 · 0⤊ 0⤋
1st make sure your car is not diesel. they don't have spark plugs...
Next, to find the spark plugs, find the spark plug wires and follow them to the spark plugs.
hope that helps...
2006-12-08 14:00:53 · answer #4 · answered by bogey 4 · 0⤊ 1⤋
Please don't touch anything you are not familiar with. They are under covers with coils on top of the plugs. If you brake anything, sell your car as is.
2006-12-08 13:55:05 · answer #5 · answered by Lab 7 · 0⤊ 0⤋
did you look in the trunk?
2006-12-08 13:53:44 · answer #6 · answered by Ron T 1 · 0⤊ 1⤋