2006-12-07 12:35:46 · 5 answers · asked by www.eazyer 1 in Cars & Transportation ➔ Maintenance & Repairs
its oil injected but doesn't work.so i'm mixiing the fuel myself to get by. i just dont want to wreck it
2006-12-07 13:32:38 · update #1
That depends on the operating conditions.
I would suggest 32-40 to 1 normally, but possibly as rich as 24 to 1 under some conditions.
(So long as you aren't "oil fouling" the plug you should be OK, and in this case, a little too much is better than not enough!)
HOWEVER
Your carb jets are NOT designed for "pre-mixed" fuel and you are probably running too "lean" on the fuel using a pre-mix, which is also bad for the engine.
I would get it the injector system fixed ASAP.
2006-12-07 14:25:09 · answer #1 · answered by f100_supersabre 7 · 0⤊ 0⤋
I have a sears 7 /a million/2 h.p. motor. Mine is an older motor, yet I run a million/2 pint oil to three gallons of gas, a million pint to 6 gallons of gas. this can or gained't be what the generating unit recommends, yet my motor does O. ok. on it.
2016-11-30 07:12:50 · answer #2 · answered by Anonymous · 0⤊ 0⤋
try 40 to 1 it's a safe mix
2006-12-07 14:01:53 · answer #3 · answered by sterling m 6 · 1⤊ 0⤋
3/4 air and 1/4 fuel
2006-12-07 12:40:17 · answer #4 · answered by Anonymous · 0⤊ 2⤋
not positive but arnt all polaris atv's oil injected?
2006-12-07 13:11:33 · answer #5 · answered by truss 2 · 0⤊ 0⤋