Running rigging, or running gear, is that part of a ship's rigging which is not fixed in place. Halyards and sheets used to hoist or control a sail, for example.
Rigging which is fixed in place, like shrouds and stays, used to hold the mast up, are known as "standing rigging"
2006-12-07 14:48:40
·
answer #1
·
answered by IanP 6
·
1⤊
0⤋
The running gear is what makes the boat move. The propellers on a motorboat push the boat forward. Without the props the engines just burn gas. On a sailboat the same principle applies. Without the sails the wind is just blowing, but once the sails are up the boat moves.
2006-12-08 17:31:10
·
answer #2
·
answered by JB 1
·
0⤊
0⤋
Running gear is the sheets and halyards used to raise and control the sails.
2006-12-07 20:54:47
·
answer #3
·
answered by science teacher 7
·
0⤊
0⤋
Here are several sites with boating terms:
http://www.boatsafe.com/nauticalknowhow/gloss.htm
http://terrax.org/sailing/glossary/gr.aspx#r
search for these terms to find more of these glossaries: "boating terms" + "running gear"
2006-12-07 20:28:48
·
answer #4
·
answered by Ginger/Virginia 6
·
0⤊
0⤋
Simple answer is on a yacht the sails. On a motor boat is the engine.. This could be inboard or outboard..eg on an inboard this could be a 5.7 mercruiser(350 chev)
2006-12-08 05:42:00
·
answer #5
·
answered by Simon A Mechanic 3
·
1⤊
1⤋
Sterndrive or I/O Motor
Inboard Motor
Outboard Motor
OMC
Cobra
Johnson
Mercury
Marine Engine
2006-12-07 20:27:26
·
answer #6
·
answered by Michael B 3
·
0⤊
1⤋
the running gear would be the mast jib sail and all ropes to Riggs the jib sail
2006-12-07 21:04:26
·
answer #7
·
answered by Anonymous
·
0⤊
1⤋
Could also be the propeller (screw) and propeller shaft or driveline, as in a car. Engine to shaft to screw= motion.
2006-12-08 13:10:46
·
answer #8
·
answered by S. T. 2
·
0⤊
0⤋
it is part of the shaft that turns the propellar taht is turns by the steam turbine or gas turbines
2006-12-08 22:19:40
·
answer #9
·
answered by lake living 5
·
0⤊
0⤋