English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

2006-12-07 02:05:56 · 5 answers · asked by URSgr8A 1 in Sports Cricket

5 answers

In 11 ways

# Caught — When a fielder catches the ball before the ball bounces and after the batsman has struck it with the bat or it has come into contact with the batsman's glove while it is in contact with the bat handle. The bowler and catcher are both credited with the dismissal. (Law 32)

# Bowled — When a delivered ball hits the stumps at the batsman's end, and dislodges one or both of the bails. This happens regardless of whether the batsman has edged the ball onto the stumps or not. The bowler is credited with the dismissal. (Law 30)

# Leg before wicket (LBW) — When a delivered ball misses the bat and strikes the batsman's leg or pad, and the umpire judges that the ball would otherwise have struck the stumps. The laws of cricket stipulate certain exceptions in favour of the batsman; for instance, a batsman should not be given out LBW if the place where the ball bounced on the pitch is to the leg-side of the area strictly between the two wickets. The purpose of this rule is to prevent the batsman from unfairly using his pads to obstruct the passage of the ball without striking it. The bowler is credited with the dismissal.

# Run out — When a fielder, bowler or wicket-keeper removes one or both of the bails with the ball by hitting the stumps whilst a batsman is still running between the two ends. The ball can either hit the stumps directly or the fielder's hand with the ball inside it can be used to dislodge the bails. Such a dismissal is not officially credited to any player, although the identities of the fielder or fielders involved is often noted in brackets on the scorecard.

# Stumped — When the batsman leaves his crease in playing a delivery, voluntarily or involuntarily, but the ball goes to the wicket-keeper who uses it to remove one or both of the bails through hitting the bail(s) or the wicket before the batsman has remade his ground. The bowler and wicket-keeper are both credited. This generally requires the keeper to be standing within arm's length of the wicket, which is done mainly to spin bowling. (Law 39)

# Hit wicket — When the batsman accidentally knocks the stumps with either the body or the bat, causing one or both of the bails to be dislodged, either in playing a shot or in taking off for the first run. The bowler is credited with the dismissal. (Law 35)

# Handled the ball — When the batsman deliberately handles the ball without the permission of the fielding team. No player is credited with the dismissal. (Law 33)

# Hit the ball twice — When the batsman deliberately strikes the ball a second time, except for the sole purpose of guarding his wicket. No player is credited with the dismissal. (Law 34)

# Obstructing the field — When a batsman deliberately hinders a fielder from attempting to field the ball. No player is credited with the dismissal. (Law 37)

# Timed out — When a new batsman takes more than three minutes to take his position in the field to replace a dismissed batsman (If the delay is protracted, the umpires may cause the match to be forfeited). This rule prevents the batting team using time limits of the game to unfair advantage. No player is credited with the dismissal.

#Retired out—If any batsman leaves the field of play without the Umpire's consent for any reason other than injury or incapacity, he may resume the innings only with the consent of the opposing captain. If he fails to resume his innings, he recorded as being Retired - out.Only two players in Test history have ever been given out in this manner, Marvan Atapattu and Mahela Jayawardene - both in the same innings of the same match playing for Sri Lanka against Bangladesh in September 2001.


Fact~Inzamam ul Haq is the player who holds record in this field of getting out in different ways, 8 to be exact(leaving Time out, Hit the ball twice and Retired out)

2006-12-07 02:08:32 · answer #1 · answered by R2 3 · 0 0

A batsman can be out in 10 different ways as explained below:

1) Caught — When a fielder catches the ball before the ball bounces and after the batsman has struck it with the bat or it has come into contact with the batsman's glove while it is in contact with the bat handle. The bowler and catcher are both credited with the dismissal. (Law 32)

2) Bowled — When a delivered ball hits the stumps at the batsman's end, and dislodges one or both of the bails. This happens regardless of whether the batsman has edged the ball onto the stumps or not. The bowler is credited with the dismissal. (Law 30)

3)Leg before wicket (LBW) — When a delivered ball misses the bat and strikes the batsman's leg or pad, and the umpire judges that the ball would otherwise have struck the stumps. The laws of cricket stipulate certain exceptions in favour of the batsman; for instance, a batsman should not be given out LBW if the place where the ball bounced on the pitch is to the leg-side of the area strictly between the two wickets. The purpose of this rule is to prevent the batsman from unfairly using his pads to obstruct the passage of the ball without striking it. The bowler is credited with the dismissal.

4) Run out — When a fielder, bowler or wicket-keeper removes one or both of the bails with the ball by hitting the stumps whilst a batsman is still running between the two ends. The ball can either hit the stumps directly or the fielder's hand with the ball inside it can be used to dislodge the bails. Such a dismissal is not officially credited to any player, although the identities of the fielder or fielders involved is often noted in brackets on the scorecard.

5) Stumped — When the batsman leaves his crease in playing a delivery, voluntarily or involuntarily, but the ball goes to the wicket-keeper who uses it to remove one or both of the bails through hitting the bail(s) or the wicket before the batsman has remade his ground. The bowler and wicket-keeper are both credited. This generally requires the keeper to be standing within arm's length of the wicket, which is done mainly to spin bowling. (Law 39)

6) Hit wicket — When the batsman accidentally knocks the stumps with either the body or the bat, causing one or both of the bails to be dislodged, either in playing a shot or in taking off for the first run. The bowler is credited with the dismissal. (Law 35)

7) Handled the ball — When the batsman deliberately handles the ball without the permission of the fielding team. No player is credited with the dismissal. (Law 33)

8) Hit the ball twice — When the batsman deliberately strikes the ball a second time, except for the sole purpose of guarding his wicket. No player is credited with the dismissal. (Law 34)

9) Obstructing the field — When a batsman deliberately hinders a fielder from attempting to field the ball. No player is credited with the dismissal. (Law 37)

10) Timed out — When a new batsman takes more than three minutes to take his position in the field to replace a dismissed batsman (If the delay is protracted, the umpires may cause the match to be forfeited). This rule prevents the batting team using time limits of the game to unfair advantage. No player is credited with the dismissal. (Law 31)

For more details, please check the followingh link:

http://en.wikipedia.org/wiki/Cricket#Dismissal_of_a_batsman

2006-12-07 02:23:39 · answer #2 · answered by vakayil k 7 · 0 0

T20 is often approximately batsmen interest on the arms of the bowlers. Even the minnow communities can knock off the worldwide's superb bowlers and we've in many situations viewed this. If the bowler had a low-value bowling of below 5runs/over meaning he did bowl properly and contained the batsmen. Very not often we see 2runs/over as Umar Gul confirmed as we communicate with 3 overs and to precise this he took 5 wickets for six runs. Such incidents are uncommon and could be his better of T20. except the bowlers can incorporate the batsmen to below 5-6runs/over that's no longer a bowlers interest. To precise this, the bowler on the max gets in basic terms 4 overs to bowl. the place because of the fact the batsman can stay for the finished 20 overs - that's yet another indicator it incredibly is truthfully a batsman's interest.

2016-12-18 09:10:55 · answer #3 · answered by ? 3 · 0 0

11 ways. All the answers that you will see here. Plus Retired Out.

Ignore the link in the above answer. That's outdated. The updated wikipedia link is here:
http://en.wikipedia.org/wiki/Dismissal_%28cricket%29

2006-12-07 05:27:13 · answer #4 · answered by pressurekooker 4 · 1 0

bowled, caught, lbw, stumped, and runout 5 ways

2006-12-07 05:43:08 · answer #5 · answered by Ray C 1 · 0 1

fedest.com, questions and answers