I want to replace the top roller wheel on our bi-fold door. The pop rivert insert is sheered and I can't get the insert out. What's the trick?
Thanks!
2006-12-05 15:35:22 · 4 answers · asked by Marty D 1 in Home & Garden ➔ Other - Home & Garden
USE A 1/8" DRILL BIT AND DRILL IT OUT. AGAIN IT MAY BE A DIFFERENT SIZE WITHOUT ME SEEING IT. IT IS THE INSIDE OF THE RIVET THAT TO BE DRILLED OUT
2006-12-05 15:40:03 · answer #1 · answered by john t 4 · 0⤊ 0⤋
The roller on the moving door is probably spring loaded. Push it into the door from above so it disengages from the track. Now fold the loose panel up to the other one and lift them both together so the bottom pin comes out of it's receptacle. Tilt them a little so the top pin drops out. Doors are free.
2016-05-22 23:07:01 · answer #2 · answered by ? 4 · 0⤊ 0⤋
try using a 1/4 to 5/16 drill bit
2006-12-05 22:31:16 · answer #3 · answered by Larry 3 · 0⤊ 0⤋
Push down (it is set on a spring) then slide the door out. To remove, with plyers pull out of hole and insert a new one. They can be purchased as replacement parts at any home improvement store.
2006-12-05 16:27:14 · answer #4 · answered by ezaz 1 · 1⤊ 0⤋