2006-12-05 13:20:00 · 5 answers · asked by Bryan 1 in Cars & Transportation ➔ Maintenance & Repairs
ENGINE OIL MAINTENANCE REMINDER LIGHT
The system must be reset after the engine oil replacement. Reset the system by the following procedure:
Push the ODO/TRIP switch in the switch box to change the display to blank.
Turn the engine switch off.
Turn the engine switch on with the trip meter RESET switch held down.
Keep pushing the RESET switch for longer than 7 seconds after the engine switch is turned on. After the above operation, the master warning light comes on, a warning tone sounds and the OIL MAINT RESET appears to inform you that engine oil maintenance has been reset.
2006-12-05 15:05:23 · answer #1 · answered by br549 7 · 0⤊ 0⤋
Or you could look in your owners manual to see if there is a reset procedure for the maintenance light that does not require a scanner.
2006-12-05 14:28:40 · answer #2 · answered by Naughtums 7 · 0⤊ 0⤋
Interface with the onboard computer using compatable software, and tell the computer the maintainance has been done
You will need a diagnostic computer that works on a Lexus
2006-12-05 13:34:55 · answer #3 · answered by Slappin 3 · 0⤊ 0⤋
its up for discussion there are actually several possible answers to the question..
2016-08-23 12:09:41 · answer #4 · answered by cara 4 · 0⤊ 0⤋
This might be feasible
2016-07-28 05:12:58 · answer #5 · answered by Anonymous · 0⤊ 0⤋