suppose to do help please
2006-12-05 09:50:15 · 5 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Desktops
Is your dsl modem receiving a signal? Check your manual to make sure that the indicator lights are flashing and acting as if it has a signal. Then try a different cable to your computer...
2006-12-05 09:53:35 · answer #1 · answered by Fremen 6 · 0⤊ 0⤋
The first step is to determine if you have a Network Interface Card (it will accept an RJ-45 connector that looks like a phoen connection but is slightly larger). If it does, you will need to activate it by going to the Control Panel and selecting Network Connections.
If you do not have a network Interface Card, you will need to puchase one (Radio Shack, Best Buy, Circuit City, etc.) and install it.
2006-12-05 09:55:49 · answer #2 · answered by crustysob 3 · 2⤊ 0⤋
Shut down your computer, unplug its network connection. Wait 5 minutes. Plug back into the network and start your computer. It should work fine.
2016-05-22 22:15:00 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Ok, you need a ethernet card, if you don't have it. But if you have it, you need to intall the driver so it can work. Try this
http://help.sbcglobal.net/
Can you tell us in what company did you purchase your acount?
I think you can search help in Google or yahoo. search for DSL installation. Good Luck
2006-12-05 09:58:56 · answer #4 · answered by Anonymous · 1⤊ 0⤋
i agree with Freman.
but also try to restart your pc just to see if it will sync connection.. if anything confirm that your connection properties are set correctly per manual
2006-12-05 10:53:02 · answer #5 · answered by babyg1rl_22 3 · 0⤊ 0⤋