tell me how to replace an ignition module on 1992 Buick LeSabre?

Question

the Serpantine Belt came off and I drove it so now it won't run. Hopefully didn't ruin the engine.

Answer 1

I do not think it's the ignition module. What has lead you to think it's the ignition module? Is the car not turning over? DO you have lights? Did you have to have it towed to where you are now working on it? I'm confused because you put in the part about the Serpentine belt. The only relation the belt has with the ignition module is the charging system on the car. If the belt came off the battery would have drained down and needs to be charged. So again why are you thinking you need to replace the ignition module? You left out some details.

Answer 2

if it is a v-6 engin thne it is most likely mounted right by the alternator, the module is what the coil packs bolt to, trace the spark plug wires to the coils, the module is flat and big and is under the coil packs, you have to unbolt the entire assembly and then separate the packs from the module

if it is not up by the alternator or if its a 4 cylinder engine then it will be either on the backside of the engine bolted to the block, or will be in the front up by the valve cover

you didnt provide enough info especially what engine you have, there were four different engines in these type of cars, the 2.5, 3.1, 3.3, and 3.8

good luck