English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I need to know how to drive a stick. Someone teach me!

2006-12-03 17:21:16 · 7 answers · asked by Anonymous in Cars & Transportation Other - Cars & Transportation

7 answers

put clutch in while you switch the gears....push the gas while you let off the clutch..when you brake, put the clutch in. Just remember that pushing the gas and letting off the clutch is a smooth motion. When you hit the brake, before coming to a complete stop, you need to put the clutch in....very simple. I love driving a manual.

it's almost impossible to explain...you need to go out and try.

2006-12-03 17:23:53 · answer #1 · answered by Anonymous · 1 0

The hardest part for me was starting off in first gear. Try pushing the gas until it hits 2000 rpms and then slowly let out on the clutch. Then when you are rolling and hear the engine start to wind up, push in the clutch and shift gears. Then let out on the clutch and press the gas. It takes some getting used to and every car drives differently. But once you get the general concept, the rest will come naturally.

2006-12-04 02:16:28 · answer #2 · answered by BJackson07 2 · 0 0

Learning to drive a stick shift isn't easy for most people, but with time and practice it becomes second nature.


STEP 1: Look at the floorboard; you'll see three pedals. From left to right, they are: clutch, brake, gas.
STEP 2: Study the simple diagram on the top of the gearshift, which will show you where the gears are. In most new cars, this will look like a three-legged H. First, third and fifth gears are at the tops of the legs; second, fourth and reverse gears are at the bottoms. The crossbar of the H is neutral.
STEP 3: Make sure the parking brake is engaged and the car is on a flat surface in an area where you have plenty of room.
STEP 4: Press down on the clutch pedal and then move the gearshift into the neutral position. STEP 5: Start the car.
STEP 6: Keeping the clutch pedal down, put the car into first gear by moving the gearshift to the top-left position.
STEP 7: Apply the foot brake and release the parking brake.
STEP 8: Release the foot brake when you're ready to start moving.
STEP 9: Begin to release the clutch pedal slowly; when you hear or feel the engine begin to slow down, slowly press down on the gas pedal as you continue to release the clutch. The car will start to move forward.
STEP 10: Accelerate until the car has reached about 3,000 rpm, then take your foot off the gas, press down on the clutch pedal, and pull the gearshift directly down through neutral to second gear. Be sure to pull the gearshift down until it can't go any farther.
STEP 11: Release the clutch pedal gently, simultaneously pressing down gently on the gas pedal.
STEP 12: Repeat the shifting process each time you hit 3,000 rpm until you're driving at the appropriate speed. (Third gear is up and to the right; fourth gear is all the way down from there; fifth gear is up to neutral, right and then up again.)
STEP 13: Downshift by releasing the gas pedal when you want to decrease your speed. Press down on the clutch and move the gearshift through neutral into the next-lower gear (move down only one gear at a time). Once you're in the lower gear, release the clutch slowly and brake as you do so.
STEP 14: Stop the car by downshifting to second gear and applying the brakes. Apply the clutch just before the car stops. Don't downshift into first.
STEP 15: Drive in reverse by following the same steps you would for starting in first gear. The reverse gear engages more quickly than first gear, however, so be sure to release the clutch slowly and begin to press the gas pedal as soon as the car begins to move. Tips &

Warnings
When you park your car, leave it in gear and set the parking brake. That way, it won't start rolling as soon as you put it in neutral to start again.
You'll know you're in the right gear for your speed if the engine is running smoothly. If it's coughing and sputtering, shift to a lower gear. If the engine noise pitch is too high, shift to a higher gear.
Avoid coasting with the clutch all the way down (called "riding the clutch"), as this will cause needless wear and tear on the clutch. When stopped at a traffic light, put the gearshift into the neutral position and release the clutch rather than sitting with the clutch engaged.
The best way to start out is to find a patient friend or relative who knows how to drive a stick shift, and practice with him or her in a large, empty parking lot where you can practice safely.
Repeated jerking, stalling, grinding, lurching and similar mishaps can wear on the clutch assembly. Be kind to your car. Ask for help if you're having difficulty learning.

2006-12-04 01:30:01 · answer #3 · answered by sharrron 5 · 0 0

Instructions

STEP 1: Look at the floorboard; you'll see three pedals. From left to right, they are: clutch, brake, gas.

STEP 2: Study the simple diagram on the top of the gearshift, which will show you where the gears are. In most new cars, this will look like a three-legged H. First, third and fifth gears are at the tops of the legs; second, fourth and reverse gears are at the bottoms. The crossbar of the H is neutral.

STEP 3: Make sure the parking brake is engaged and the car is on a flat surface in an area where you have plenty of room.

STEP 4: Press down on the clutch pedal and then move the gearshift into the neutral position.

STEP 5: Start the car.

STEP 6: Keeping the clutch pedal down, put the car into first gear by moving the gearshift to the top-left position.

STEP 7: Apply the foot brake and release the parking brake.

STEP 8: Release the foot brake when you're ready to start moving.

STEP 9: Begin to release the clutch pedal slowly; when you hear or feel the engine begin to slow down, slowly press down on the gas pedal as you continue to release the clutch. The car will start to move forward.

STEP 10: Accelerate until the car has reached about 3,000 rpm, then take your foot off the gas, press down on the clutch pedal, and pull the gearshift directly down through neutral to second gear. Be sure to pull the gearshift down until it can't go any farther.

STEP 11: Release the clutch pedal gently, simultaneously pressing down gently on the gas pedal.

STEP 12: Repeat the shifting process each time you hit 3,000 rpm until you're driving at the appropriate speed. (Third gear is up and to the right; fourth gear is all the way down from there; fifth gear is up to neutral, right and then up again.)

STEP 13: Downshift by releasing the gas pedal when you want to decrease your speed. Press down on the clutch and move the gearshift through neutral into the next-lower gear (move down only one gear at a time). Once you're in the lower gear, release the clutch slowly and brake as you do so.

STEP 14: Stop the car by downshifting to second gear and applying the brakes. Apply the clutch just before the car stops. Don't downshift into first.

STEP 15: Drive in reverse by following the same steps you would for starting in first gear. The reverse gear engages more quickly than first gear, however, so be sure to release the clutch slowly and begin to press the gas pedal as soon as the car begins to move.

Tips & Warnings

When you park your car, leave it in gear and set the parking brake. That way, it won't start rolling as soon as you put it in neutral to start again.

You'll know you're in the right gear for your speed if the engine is running smoothly. If it's coughing and sputtering, shift to a lower gear. If the engine noise pitch is too high, shift to a higher gear.
Avoid coasting with the clutch all the way down (called "riding the clutch"), as this will cause needless wear and tear on the clutch. When stopped at a traffic light, put the gearshift into the neutral position and release the clutch rather than sitting with the clutch engaged.

The best way to start out is to find a patient friend or relative who knows how to drive a stick shift, and practice with him or her in a large, empty parking lot where you can practice safely.
Repeated jerking, stalling, grinding, lurching and similar mishaps can wear on the clutch assembly. Be kind to your car'ask for help if you're having difficulty learning.


my learning how was soo funny. my mom taught me when i was nine, so you could only imagine how jerky it was!! and how many times i killed the engine!! hope all the info helps :)

2006-12-04 01:28:11 · answer #4 · answered by amber 2 · 0 0

This takes practice, it depends on how many shifts you have to shift as 3, 4, or 5 speed. There is no way to learn excect to get in an drive by trial and error. You have to learn to shift gears, let off the clutch, and accelerate by pushing the gas peddle without making the car jump.

2006-12-04 01:24:48 · answer #5 · answered by Sparkles 7 · 0 0

pratice, pratice, and more pratice....find a big open empty parking lot and go with it, it dosent take long to get the hang of it...i think most peoples fears when first learning is hills, and rolling back....but like i said find a big open parking lot and pratice until you get the hang of taking off and changing gears....after you get that down, find a rarely untraveled road maybe a back road somewhere with a hill then pratice on it for awhile untill you get the hang of not rolling back....i think you'll be on the road in no time....good luck to you

2006-12-04 01:25:34 · answer #6 · answered by bshelby2121 6 · 0 0

get out on some back roads or an empty parking lot, if you have someone who can assist your learning curve it would be helpful, then just experiment. it'll take some time but eventually you'll get the hang of it (or buy an automatic)

2006-12-04 01:27:39 · answer #7 · answered by Ryan B 2 · 0 0

fedest.com, questions and answers