the cursor is on the screen but can't move it. tried changing the batteries and re installing mouse driver still not working . also tried a mouse in the other port (not usb) that won't work either. help or advice needed.
2006-12-03 05:27:23 · 8 answers · asked by clairebear 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
You can try pushing the reset button on the bottom if it has one. If noy and you're sure that the batteries are fine, you're gona hve to buy a new mouse.
2006-12-03 05:59:49 · answer #1 · answered by Fredo 4 · 1⤊ 0⤋
The first thing to try is to resync, pushing the little button on the bottom of the mouse (and if you have a separate receiver, there too).
Next, if you have a separate receiver, make sure it didn't become unplugged from the computer, and that it's not partially pulled out.
If not, it's probably the batteries. Wireless mice are notorious for using up their batteries. If you haven't changed batteries for a while, put in a new set.
I stopped using wireless mice just because I was going through too many batteries. Every couple of weeks I needed a new battery. There are rechargeables, but I was just as happy going back to a corded mouse.
2006-12-03 05:41:02 · answer #2 · answered by T J 6 · 0⤊ 0⤋
try resetting mouse that works for me there is a button on the mouse ( usually underneath) that when you push it it will reset.. push hold like 5 seconds
2006-12-03 05:39:15 · answer #3 · answered by Dawna G 1 · 0⤊ 0⤋
The same happened to me, change the batteries, if that doesn't work, bummer dude, new mouse
2006-12-03 05:36:16 · answer #4 · answered by vjatigerrr 2 · 0⤊ 0⤋
you must reset the mouse look for a small button on the mouse and receiver you can use a small head pin to reset the button are small
2006-12-03 05:34:54 · answer #5 · answered by martin 2 · 1⤊ 0⤋
turn the mouse the different way up. you'll see the thanks to take off slightly plate. It slides down and of. lower than the plate, you'll see a battery. replace it because its wiped out. once you positioned a sparkling one contained in the suited way, the mouse will paintings lower back. Wha-laa!!
2016-11-23 14:35:03 · answer #6 · answered by shoaf 4 · 0⤊ 0⤋
If your computer is not working properly while you are working on it, it could be a problem with device drivers, hardware or software.
Detailed instructions at http://tinyurl.com/yk5zpr
2006-12-04 14:26:52 · answer #7 · answered by Anonymous · 0⤊ 0⤋
New mouse.
2006-12-03 05:30:59 · answer #8 · answered by Maid Angela 7 · 0⤊ 0⤋