If so what part?
2006-12-03 03:31:40 · 7 answers · asked by JAMES S 1 in Home & Garden ➔ Maintenance & Repairs
Yes there is, it is usually the parts that plug together. I have collected them and taken them to scrap dealers. Also electrical relays, the larger ones have silver contacts, I take the contacts off and take them to a place buying silver, usually they need to have it sent in to find out the content of silver. Since I usually get a little copper mixed in when I cut them off I usually end up about 87% pure industrial silver.
2006-12-03 03:53:27 · answer #1 · answered by Thomas S 6 · 0⤊ 0⤋
the only place you will locate gold on the revealed circuit boards would be on connectors. there will be an exceedingly factor plating (tens of microinches) on: - the "hands" of plug in taking part in cards - the pins on headers. it fairly is there because of the fact they're unprotected and uncovered to air. Gold does not corrode so while it's time to plug in a clean gadget, which will even have gold plated connectors, you have gotten a stable connection.
2016-12-10 21:04:27 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Yes.. in small amounts.. Thus, ilt would not pay you to start mining circuit boards because you would not get rich at it.
2006-12-03 03:49:54 · answer #3 · answered by Anonymous · 0⤊ 0⤋
In some cases, yes. It'll most likely be in places where good metal-to-metal contact and conductivity is paramount.
Gold is used in those cases because it hardly oxidizes at all, while copper oxidizes quite readily.
2006-12-03 03:36:57 · answer #4 · answered by Joseph 2 · 1⤊ 0⤋
No, because gold is a poor conductor
2006-12-03 03:41:32 · answer #5 · answered by Anonymous · 0⤊ 1⤋
yes it is true
2006-12-03 03:49:57 · answer #6 · answered by Rosey 2 · 0⤊ 0⤋
ya what he said
2006-12-03 03:41:09 · answer #7 · answered by mustang_silverado 3 · 0⤊ 0⤋