2006-12-03 00:30:09 · 6 answers · asked by goober j 1 in Computers & Internet ➔ Computer Networking
This always happens to me, Linksys is not a good company with routers. But since you already have a Linksys Router and you need help I made a website with instructions to fix it. Go to http://www.freewebs.com/linksyshelp and then go to the "Help!" page
Hope this works :),
Phil
2006-12-03 00:40:24 · answer #1 · answered by Phil 4 · 0⤊ 0⤋
It is most likely a configuration problem on either the wireless side of the router or the wireless settings on the client PC. The wireless settings on the client PC should be match to what is on the wireless router. If you are using WEP or WPA for security then you need to match these settings on your client. If you don't see any signal at all then you may have beacons disabled on the wireless router so it will not broadcast the SSID or network name that you have assigned to your wireless. Make sure the client PC has the same SSID/Network Name as the wireless router and then refresh your wireless to see if it is now visible. If none of this works your best bet is to just reprogram your wireless router to match new settings and see if this resolves your issues.
2006-12-03 04:21:50 · answer #2 · answered by ceredurseconds 2 · 0⤊ 0⤋
Suggest you go to the Linksys web site. They have instructions and tutorials to get you set up quickly. Or call their help desk.. They are sharp people at Linksys.
2006-12-03 00:32:49 · answer #3 · answered by snvffy 7 · 0⤊ 0⤋
had same problem, save ur stuff and reset factory settings, re establish router connection and connect to wireless network worked for me but make sure u save anything u want to disk
2006-12-03 00:35:02 · answer #4 · answered by carl c 2 · 0⤊ 0⤋
I actually have a button at the front of my computing device that asserts "on" and "off". it really is for choosing up a instant signal. when I actually have my computing device on my lap I actually have each and every from time to time grew to develop into it from "on" to "off" and then i do not get the web. seem on your computing device for an similar change. I actually have a toshiba. reliable luck.
2016-11-30 02:06:13 · answer #5 · answered by Anonymous · 0⤊ 0⤋
make sure your firewall is setup to accept your connection! and on your network connection on properties select automatic configuration for IP and DNS
2006-12-03 00:35:38 · answer #6 · answered by bogdan 2 · 0⤊ 0⤋