I have a 350 tbi motor that i am modifing and i was woundering what i would have to do to the injectors to run 100 octane gas?
2006-11-29 22:19:32 · 7 answers · asked by cobra69_68467 2 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
you won't have to do anything to the injectors. but if you have a stock 350, which i'm guessing you do, since few people keep the TBI when they go high-performance...then you don't need 100 octane gas. despite the myths of high octane making your engine run better and more efficiently, it is only for high compression engines. if you have a stock 350 that has always ran on normal grade gas, you will only be wasting money putting 100 octane in it.
2006-11-30 03:25:31 · answer #1 · answered by Anonymous · 3⤊ 0⤋
Nothing. 100 Octane gas has no effect on the injectors. It's the rest of the engine that must be changed.
2006-11-30 16:43:52 · answer #2 · answered by ? 4 · 1⤊ 0⤋
The octane won't make a difference to an injector. You don't say what you are modifying, but the engine may need more fuel to run properly. I'm not sure if the ECU will be able to accomplish this without different injectors.
2006-11-30 08:11:33 · answer #3 · answered by Anonymous · 2⤊ 0⤋
what are you doing to the motor that would make it need 100 octane gas?
If you are going with forced-induction, you will need to replace the injectors along with other components.
If you are doing the typical bolt-ons there is no need for that high octane fuel.
2006-11-30 08:35:10 · answer #4 · answered by darwal8817 3 · 1⤊ 0⤋
Change them out I hope you have changed other thing you know high octane fuel will make your car run real hot
2006-11-30 06:23:30 · answer #5 · answered by Normefoo 4 · 0⤊ 0⤋
just a plan stock motor wont last long with octane basically rebuild and port and polish put high perfomance parts etc.
2006-11-30 21:48:56 · answer #6 · answered by lake living 5 · 0⤊ 1⤋
just make sure they are clean.
2006-11-30 06:25:00 · answer #7 · answered by midnighttoker 3 · 1⤊ 0⤋