How to remove door panel from 95 Accord to move window?

Question

I need to replace the motor/regulator for my power window but can't spend $300 on it right now. Unfortunately, the window is stuck in the down position and I drive to work when its 4am and 40 degrees! I am hoping it is possible to remove the door panel and lift the glass to the up position and keep it in place.

Is anyone able to walk me through the steps necessary to do this properly? Much appreciated!

Answer 1

Sorry, but no.
There is simply too much to try to explain here, and too many details. Illustrations are needed.
If money is the only issue, go to the library, and in the REFERENCE section, check their repair manuals. They won't let you check it out, but you can certainly read it there and take notes. Be careful about photocopying. COPYRIGHTS you know.
While you are there, ask if they subscribe to Mitchell On-Demand or ALLDATA. Both are very good references, professional level and will have every detail available, including illustrations, and it has a PRINT feature.
Really good stuff.
If you can pony up $20.00, you can purchase a repair manual for the little car at the parts store, book store, Amazon, BN.com or ????

Good Luck and Merry Christmas

Answer 2

Your door cope with could desire to have a bolt/screw in the middle of the cope with, eliminate the retainer with the right wrench. maximum door panels on later variety automobiles are held onto the door with plastic clips that are molded into the door panel. attempt bumping the backside of your door panel in the direction of the precise mutually as gently pulling the backside of the panel gently remote from the main door on the comparable time. verify you have all the retainer screws remote from the door panel before you initiate.