how do i install a plow 400 4x4 The instructions suck!
2006-11-29 14:35:34 · 4 answers · asked by MICHAEL J P 1 in Cars & Transportation ➔ Motorcycles
Yea they do! It took me over 3 hrs the very first time. After doing it a few times, it became sort of 2nd nature. Take it one step at a time.
Do the simple stuff first to get rid of some parts and hardware.
--Install the frame mount to the quad.
--Put the blade together.
--Put the main plate and angle plate together.
--Install the plow blade to the main plate
--Install the springs, grab one end with vice grips and pull (they're stiff, 2 people are help full).
--Put a jack under the plow assembly to lift and mount to the quad.
Remember, take it one step at a time until you get that step completed properly.
Do the easy, simple, obvious stuff first.
2006-11-30 02:10:35 · answer #1 · answered by guardrailjim 7 · 0⤊ 0⤋
You are probably going to have to visit your local dealer and take a look at one that they have installed on a display model. Depending on how helpful the dealer is--they may tell you how to do it. Some dealers won't tell you because they feel that you could be paying them to do it instead of them telling you how to do it for free. If none of this works, you will need to take it to them to put it on anyway.
2006-11-30 10:17:56 · answer #2 · answered by ...mr2fister... 7 · 0⤊ 0⤋
go to your dealer
2006-11-29 22:46:36 · answer #3 · answered by xlhdrider 4 · 0⤊ 0⤋
im freezing....
2006-11-29 22:37:08 · answer #4 · answered by Anonymous · 0⤊ 0⤋