2006-11-29 14:34:33 · 5 answers · asked by frosted f 2 in Cars & Transportation ➔ Maintenance & Repairs
First clean your windows with a good window cleaner, name brand like windex, then get a spray bottle mix water and a soapy material, then spray it on both the window and tint. Make sure to place the tint near perfect on the window, and get a squegy and smooth it out from the center towards the outside, the soap will help you move the tint where you want it then squegy it out and when your down take a blow dryer and lightly go over it to take out wrinkles and air bubbles, patience is key when installing tint.
2006-11-29 14:51:35 · answer #1 · answered by tony b 2 · 0⤊ 0⤋
first, cut a pattern on the outside of the glass. make sure the windows are "VERY" clean. scrape them down with a stainless razor blade and soapy water. spray the windows with slightly soapy water. that will allow the tint to slide around a little to get it where you want it. then squeegee as much of the water out as you can. don't roll down the windows for a couple of days to make sure it sets up properly. these are just a few of the basic tips. good luck, it can be a little tricky. you might be better off taking it to a pro.
2006-11-29 14:50:43 · answer #2 · answered by all8upchamp 4 · 0⤊ 0⤋
What have you got, a can of automotive paint that requires a spray gun and a compressor or a can of spay paint. Ether requires the car to be sanded and prepped.
2006-11-29 14:41:30 · answer #3 · answered by Lab 7 · 0⤊ 1⤋
Take it to the shop where it is done. it will look a lot better.
2006-11-29 14:38:34 · answer #4 · answered by Toby K 3 · 0⤊ 0⤋
yea 1 big tip for you ,BUY A REAL CAR
2006-11-29 14:36:22 · answer #5 · answered by Anonymous · 0⤊ 1⤋