I have a monitor that has BNC female conectors on it, there are 5 total. 3 of them are G--R--B (thats how they are in the back) the other two are HD--VD. My question is if I get a Bnc Male to RCA Female Video Connector and connect a green cable to the G and a Red cable to the R and a Blue cable to the B will it work (sorry for the poor terms not to sure on the terms I should use) I am tring to hook up a dvd player to it.
Thanks
2006-11-28 17:07:57 · 2 answers · asked by rc11982 2 in Computers & Internet ➔ Hardware ➔ Monitors
i believe the other 2 are vertical and horizontal sync so it probably wont work without them hooked up they may have adapters but its probably cheeper to get a new moniter
2006-11-28 17:12:45 · answer #1 · answered by Douglas G 4 · 0⤊ 0⤋
it is going to variety fairly with producer. some are designed to be in basic terms pushed in, or maybe twisted in. verify for continuity between the reveal screen at each and each end and the important pin at each and each end, and that there is no short between reveal screen and pin. in basic terms one fantastic strand could reason the fast. maximum types have a compression setting up - that presses on the reveal screen because of the fact the housing is screwed on. The important pin might desire soldering too. i discover that procuring those cables waiting made saves a great style of difficulty and is greater less costly than the factors. If the cable diameter is in basic terms too large or small it quite is a undertaking.
2016-12-13 16:31:09 · answer #2 · answered by Anonymous · 0⤊ 0⤋