The unit quit working, thinking that it was the battery, a new one was installed. This did not solve the problem. Any ideas?
2006-11-28 08:20:34 · 6 answers · asked by bjknef 1 in Cars & Transportation ➔ Car Makes ➔ Pontiac
Holding the lock and ulock button works for factory remotes, if out of sync.
But you said remote starter.....Which leads me to believe that you do not have a factory remote so the above will not work.
Pontaic made the Aztec from 2001-2005 and none of them had factory remote start. The 2005 was the first year Pontiac ever offered factory remote start.
If you could tell us what aftermarket system you have installed we could give you an answer.
GM World Class Technician - Body and Service
ASE Master Technician
15 year experiance
2006-11-29 03:41:03 · answer #1 · answered by allums1969 2 · 0⤊ 1⤋
Remote start is an aftermarket deal on the Aztec. Check out any info you have on the unit and research it that way. The other answers may work, but may not.
2006-11-28 12:05:56 · answer #2 · answered by InjunRAIV 6 · 0⤊ 0⤋
goofs . take the little screw [s]out to acess the front panel .theres little electronic contacts .where the buttons press the contacts. use a a small eraser nothing sharp or metallic an press each one or the one u need . if that dont work check the internal battery connections if it still dont work . dealer item.
2016-03-28 23:05:06 · answer #3 · answered by Anonymous · 0⤊ 0⤋
probably out of sinc , go to veh and hold lock and unlock buttons at same time for approximately 7 seconds they should click and work
2006-11-28 08:36:26 · answer #4 · answered by kurt w 2 · 0⤊ 0⤋
Leave the fob in the vehicle for a few hours it will reset and then it will work.
2006-11-28 08:23:44 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Check the fuse.
2006-11-28 08:28:15 · answer #6 · answered by Martin k 2 · 0⤊ 0⤋