English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

My tool shed will have either vinyl siding or simply sidded with plywood and painted. Can I get away with using regular studs to help reduce the costs? Thanks.

2006-11-28 07:08:03 · 18 answers · asked by Thinker 1 in Home & Garden Do It Yourself (DIY)

18 answers

Well sure you can.
If your house is frame construction, it's not built with pressure treated studs.
If your shed is going to sit directly on the ground, you might want to have the bottom plate of the wall be of pressure treated lumber certified for ground contact..

2006-11-28 07:15:45 · answer #1 · answered by tmlamora1 4 · 1 0

1

2016-05-02 20:11:59 · answer #2 · answered by ? 3 · 0 0

2

2017-01-22 12:51:44 · answer #3 · answered by kiera 4 · 0 0

Sheds Pressure Treated

2016-12-17 03:46:11 · answer #4 · answered by ? 4 · 0 0

Your joists should all be pressure treated if off the ground. The bottom plate can be PT if the walls will sit on a slab. Depending on the style of the roof, you could even go to 2x3 which are significantly cheaper. You can also go 24" OC with 2x4s. A 7/16" or 3/8" OSB would be fine for sheathing. Some may recommend a housewrap of some sort due to the "sweating" of the vinyl. This is true, but considering that the shed will not be completely air tight and will assumingly have drafts if you are building your own door, then that is not neccessary. I would recommend however to go vinyl instead of the T-111 plywood walls to extend the life of teh shed from the elements. Good Luck.

2006-11-28 14:07:44 · answer #5 · answered by James C 2 · 0 0

Yes, you can. Most commercial sheds are built that way. The wall studs will not be exposed to the weather. With the money you save on the studs, I suggest you put them 16 inches on center. Some commerical sheds have wider spaces between studs, but I think the walls should be supported by the same sort of structure many houses have.

2006-11-28 07:20:34 · answer #6 · answered by jackbutler5555 5 · 0 0

Yes, provided you have it raised off the ground on blocks or other foundation. That said, I'd still recommend you use treated lumber for the bottom framing, treated lumber is not that much more expensive, and the wood is usually better quality than the cheap studs they try to sell nowadays since the treated lumber has been graded before it was treated. If you use a wood floor in the shed, use treated plywood for the floor as well. I built one for my metal 10x10 shed, used 2x6 treated framing and 3/4 treated plywood, and set it up on bricks to get it of the ground--has been in use for 16 years with no problems.

2006-12-02 02:08:35 · answer #7 · answered by Anonymous · 0 0

You should be able to use standard wood studs on any part of the shed that doesn't come into contact with the bare ground.
If your tool shed is going to have a wood floor, then use pressure treated wood for that part of it, & switch to regular wood for the rest.

2006-11-28 14:41:19 · answer #8 · answered by No More 7 · 0 0

Pressure treating wood products with preservatives prevents attack by insects, micro-organisms, and fungal decay. It is especially important to use pressure treated wood in hot and humid climates, or wherever wood comes in direct contact with soil or water. Treated wood provides a long- lasting product by greatly extending the service life of structures — both indoors and outdoors.
It appears that your shed will need only base plate to be made of treated wood all remaining could be regular, it is not a permanent structure expected to last 25 or more years. Remember to use exterior grade plywood for siding. Interior grade will deteriorate quite fast 3 to 5 years in humid climate.

2006-11-28 07:17:23 · answer #9 · answered by Anonymous · 0 0

Treated wood is resistant to moisture, termites, rot and mildew.
So bottom line is keep the regular studs dry or go with pressure treated studs!

2006-12-01 12:42:02 · answer #10 · answered by wellworth123 2 · 0 0

fedest.com, questions and answers