I know the originals were c4s but these are no longer made
2006-11-28 07:07:49 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
You can also use Autolite plugs which used to be a division of Motocraft. Their book goes by the plug thread size for which on e to use. They are listed as follows:
14mm thread holes 403
18mm thread holes 386
7/8-18 pipe thread 3076
1/2-14 pipe thread 3095
Might have a tough time getting singles in Autolite. So they might make you take a box at a time.
2006-11-28 07:22:45 · answer #1 · answered by Bmod98 3 · 0⤊ 0⤋
Champion A 25 will fill the bill.
2006-11-28 15:11:47 · answer #2 · answered by oklatom 7 · 0⤊ 0⤋
champian industrial, stock 561, part w16y same as C4 or champian industrial , stock 569,part w14 same as c5 about 7 bucks here
2006-11-28 15:27:44 · answer #3 · answered by goat 5 · 1⤊ 0⤋
you will probably have to go to a very good parts store or implement dealer. any plug they sell will work on that old thing as long as it is proper heat range
2006-11-28 15:10:12 · answer #4 · answered by D42D 3 · 0⤊ 0⤋
http://www.thefordsonhouse.com/p-fordson.html#engine
check this list.
2006-11-28 15:14:14 · answer #5 · answered by Trackerrrr 4 · 0⤊ 0⤋