My printer is an HP All-in-One. I go through the HP set up menu and make all of the adjustment to print on the envelopes, and it still doesn't seem to be working. When I put the envelope in the paper tray exactly where the envelope icon is, the addresses are still printing on the opposite side of the tray.
2006-11-27 16:03:02 · 8 answers · asked by Anonymous in Computers & Internet ➔ Hardware ➔ Printers
The software you are using is the key. What are you using?
2006-11-27 16:06:04 · answer #1 · answered by Computer Guy 7 · 0⤊ 0⤋
If the address prints on the opposite side of the tray, can't you just shift the envelopes over?
Personally, I don't bother printing directly on envelopes, Usually you can only feed 15 or so at a time and cannot leave the printer in case they jam. Suggest you use labels.
2006-11-27 16:07:24 · answer #2 · answered by TheHumbleOne 7 · 0⤊ 0⤋
To print address directly on envelope:
Type address on a document, for more than one address, type them under each other leaving a space between each address
Use regular paper for the test
Go to TOOLS / Letters and Mailings / Envelopes and Labels
Select Envelopes / options /
then set the fonts for both SEND and Return address
The first address should appear in the Delivery Address square.
Enter your address in the return addres and print.
Compare printed information with your label paper for alignment.
When all is ready, place your envelopes upside down in your
print tray. Begin printing.
2006-11-27 16:57:23 · answer #3 · answered by Anonymous · 0⤊ 0⤋
I am sort of split on this one. Ultimately, I prefer the look of handwritten invitations that are in calligraphy. However, this only applies if you have great handwriting. I would much rather see a label than sloppily written invitations. For mine, I am handwriting them. I brushed up on my calligraphy and have been doing 5 to 10 a day to break the task up and ensure that I don't get sloppy. I am sort of anal about mine, and don't want anyone else helping me with them anyway, just to make sure that the addresses and names are correct. I have a huge family and wouldn't want anyone to have a misspelled name or mistake. I wouldn't want to help anyone address theirs, that's for sure! The return addresses were printed by my invitations company for no extra charge on the flap of the envelope. I wouldn't want to write my address 150 times! I think this is not really an issue in these times. I find it funny that people make a fuss about this because I don't really see how it's rude or not rude to address your own envelopes. Proper etiquette actually dictates that all words are written out to the fullest on the invitations as well, but the post office doesn't appreciate it if you don't use the two letter abbreviations for states. Really, you should write out the whole name, if you are going by what the etiquette books say. The bottom line is: if you have nice handwriting and the time, addressing your own is a nice touch. If not, labels are ok. Don't pay someone to do it; what a severe waste of money.
2016-03-28 22:28:41 · answer #4 · answered by Anonymous · 0⤊ 0⤋
Use Microsoft Publisher to make the envelope. Then print a sample sheet. Then according to the place the printer printed it, place the envelope in the machine.
2006-11-27 16:16:08 · answer #5 · answered by Good Boy 2 · 0⤊ 0⤋
Flip the envelope around? If you are using MS Word, you can select Tools, Envelopes/Labels, and there are wizards that will help you. There are also wizards or guides in Open Office which is free to download.
2006-11-27 16:14:08 · answer #6 · answered by chrisnterri520 3 · 0⤊ 0⤋
i think you need to setup the printing on the program, i mean if you are using microsoft word, you need to go to File - Page Setup.. adjust the paper type to envelope and then you can try to see how it will view with the File - Print Preview..hope it work baby..
2006-11-27 16:13:49 · answer #7 · answered by Anonymous · 0⤊ 0⤋
maybe you need to adjust the sides that hold the paper. envelope sideways?
2006-11-27 16:07:08 · answer #8 · answered by justcurious 5 · 0⤊ 0⤋