pulling harmonic bal. it turns eng. even with strap wrench . will it hurt to put #1 at tdc dissconect battery then pull it even if eng turns . then put it back together bring #1 back to tdc & reconnect bat ? Im concerned about cam position sensor & crank sensor .
2006-11-27 10:43:20 · 6 answers · asked by bigfred1954 4 in Cars & Transportation ➔ Maintenance & Repairs
your balancer has a drift key in it. go ahead, pull it off. it is impossible to missalign it.
2006-11-27 12:23:54 · answer #1 · answered by chevy69 2 · 0⤊ 0⤋
you don't need to disconnect the battery or to put #1 piston at
tdc.to stop the balancar from turnig remove the starter moter
and stick a big screw driver between the engine block and the
flywheel teeth that way the engine won't turn then remove the balancer to put it back it has a key so is impossible to install it
wrong!
2006-11-27 13:46:16 · answer #2 · answered by JD. the nice guy 2 · 0⤊ 0⤋
The books say all that for safety reasons. So, is ok that engine turns when your trying to get hatmonic balancer off. Everything is still linked together in the timing chain area anyways. The sensors won't be hurt by what your trying to do.
2006-11-27 10:47:56 · answer #3 · answered by Silverstang 7 · 1⤊ 0⤋
make a mark on the ring gear on the flywheel for reference.
2006-11-27 11:01:57 · answer #4 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋
I believe the balancer has a key. right ??
2006-11-27 12:11:07 · answer #5 · answered by tronary 7 · 0⤊ 0⤋
Your question is vague.
Do you mean tow the vehicle with battery disconnected?
2006-11-27 10:47:30 · answer #6 · answered by michelle_greene_ragio 2 · 0⤊ 2⤋