If we consider the volume of water is known.(If not known then use graduated cylinder and find the volume)
Mass of water can be calculated using following formula:
Density(ρ)=mass(m)/volume(V) , where
ρ is the object's density (measured in kilograms per cubic meter)
m is the object's total mass (measured in kilograms)
V is the object's total volume (measured in cubic meters)
(Temp (°C)/ Density (g/cm3)
30/ 0.9957
20 /0.9982
10 /0.9997
0 /0.9998
−10/ 0.9982
−20 /0.9935
−30/ 0.9839 )
2006-11-27 06:43:40
·
answer #1
·
answered by namrata00nimisha00 4
·
2⤊
0⤋
The density of wate is 1 gm/ml or 1 kg/l
We know, Mass=density x volume
so if you know the volume of the water contained in the glass (a measuring glass has volume information) then you can calculate the mass.
Suppose, you have 250 ml of water
then mass= 1 x 250 = 250 grams.
So, the mass of the water is 250 grams!!
2006-11-27 06:37:29
·
answer #2
·
answered by mashiul1970 1
·
0⤊
0⤋
Density (symbol: Ï - Greek: rho) is a measure of mass per volume. The average density of an object equals its total mass divided by its total volume. An object made from a comparatively dense material (such as iron) will have less volume than an object of equal mass made from some less dense substance (such as water). The SI unit of density is the kilogram per cubic metre (kg/m3)
p = m/v
where
Ï is the object's density (measured in kilograms per cubic meter)
m is the object's total mass (measured in kilograms)
V is the object's total volume (measured in cubic meters)
2006-11-27 06:30:32
·
answer #3
·
answered by aw03172001 3
·
0⤊
0⤋
The mass/volume ratio of the metric scale is based on the density of water. That is one liter of pure water is equal of one kilogram, and one milliliter (or cubic centimeter) of water is equal to one gram.
Of course, any non-distilled water you have will vary somewhat from that standard because of minerals and other impurities in the water, but this figure should be close enough for most experiments.
2006-11-27 06:32:09
·
answer #4
·
answered by bgdddymtty 3
·
0⤊
0⤋
Check the amount of water using a calibrated container and check the water temperature.
2006-11-27 06:29:03
·
answer #5
·
answered by Anonymous
·
0⤊
0⤋
ml or Litres
2006-11-27 06:31:32
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
mass = molar mass / moles
2006-11-27 06:29:18
·
answer #7
·
answered by notsome 2
·
0⤊
0⤋
ounces
2006-11-27 06:28:26
·
answer #8
·
answered by Anonymous
·
0⤊
1⤋