When I was a radio DJ (a long time ago :-)) we used a 50/50 solution of Fairy/ cold water and dipped the record in - then rinsed in a bowl of cold water and allow to air dry - this allowed the record to have a longer life as well -
2006-11-26 21:00:45
·
answer #1
·
answered by Anonymous
·
0⤊
0⤋
If it is just dust on the surface a 'velvet' type record cleaning cloth will do but may induce 'static'. If the dust is stuck in the grooves use warm soapy water (not hot as that will soften the vinyl). Dry with a clean tea towel (used for drying glasses).
When my own records had surface noise I put them on the draining board, applied a 50/50 mix of washing up liquid and gently scrubbed the liquid into the grooves with a SOFT tooth-brush going in the direction of the grooves. I rinsed the soap off with cold running water and then rinsed the tap water off with distilled water (or water collected from defrosting the fridge). The records were dried using a clean tea towel. It works a treat.
2006-11-28 02:08:04
·
answer #2
·
answered by Examiner 3
·
0⤊
0⤋
You can buy a proper cleaner at most record shops. The way to do it on the cheap is too get some soft felt that will pick up dust and wrap it around some thing like a toilet roll inner etc. Let the table turn and GENTLY push down on the record, following the tracks in the record. Job done.
2006-11-26 20:53:34
·
answer #3
·
answered by rgrahamh2o 3
·
0⤊
0⤋
You can actually get a proper 'duster' for the vinyls that won't scratch the surface as they were specifically designed for that purpose. Your best bet would be to go to a record shop in your area that sells vinyls as they probably stock it. I know mine do so worth a shot.
2006-11-26 20:45:01
·
answer #4
·
answered by JACQUI S 3
·
0⤊
0⤋
The dust is attracted by static.
Use a lint-free cloth and wipe in the circular motion with the groove.
Do this each time you play.
2006-11-26 20:55:54
·
answer #5
·
answered by Michael H 7
·
0⤊
0⤋
Done this many times - luke warm water with a dash of fairy liquid, and a SOFT cloth or sponge, wipe carefully in direction of grooves. Then small amount of warm water and a dash of STAYSOFT fabric softener, dip sponge/cloth, squeeze to damp, wipe in direction of grooves. This assists with the static. resleeve in decent cover. Good luck
2006-11-26 20:50:58
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
go to the local record shop and ask for an anti staic duster any shop worth there salt should have one www.townsend-records.co.uk this site sells them for £4.99
2006-11-26 20:49:55
·
answer #7
·
answered by Anonymous
·
0⤊
0⤋
What is vinyl records? Are they like giant black cd's?
2006-11-26 20:44:52
·
answer #8
·
answered by Powerpuffgeezer 5
·
0⤊
1⤋
Try using a paint brush
2006-11-27 00:54:44
·
answer #9
·
answered by Mea 5
·
0⤊
0⤋
WE HAVE A VELVET RECORD CLEANER, NOT SURE IF YOU CAN BUY THEM NOW,OURS IS FROM THE SEVENTY'S, BUT IF YOU GET ONE OF THEM MICRO DUSTERS IT SHOULD WORK THE SAME.
2006-11-26 23:10:55
·
answer #10
·
answered by aunty m 4
·
0⤊
0⤋