my new new pc config is
D102 INTEL ORIGINAL MOTHER BOARD (MD IN CHAINA)
80 GB HDD
2.8 GHZ INTEL PENTIUM D PCR
256 RAM
MICROSOFR KYB & MOUSE
PLEASE HELP ME ....
2006-11-26 16:55:13 · 5 answers · asked by Debashis 1 in Computers & Internet ➔ Hardware ➔ Other - Hardware
you need to make sure they are compatable with your system.ask the maker of the pc.
2006-11-26 16:58:27 · answer #1 · answered by Anonymous · 0⤊ 0⤋
It is because you have USB keyboard and mouse.
You have to enable USB keyboard and mouse support from your BIOS first before you can use them.
Here's how you set it:
- First you need a PS/2 keyboard to enter the BIOS
- Press Del when computers start (When checking memory precisely) to enter BIOS
- Go to Integrated Peripherals
- Make sure that USB Controller, USB 2.0 Controller, USB Keyboard Support, and USB Mouse Support are enabled.
- Save the BIOS settings and restart
- Turn off you computer
- Now you can plug your USB Keyboard and Mouse then turn on your computer!
2006-11-27 01:15:12 · answer #2 · answered by Dede Indrapurna 3 · 0⤊ 0⤋
The same thing happened to me. So instead of using the on-board usb ports, i got a pci usb card and all is fine now.
2006-11-27 01:03:30 · answer #3 · answered by gandalf 4 · 0⤊ 0⤋
If the kb and mouse are usb based, make sure they are plugged in nice and tight.
FYI - expand your memory to 512. You will be much happier.
2006-11-27 00:59:35 · answer #4 · answered by orlandobillybob 6 · 0⤊ 0⤋
If your computer is not working properly while you are working on it, it could be a problem with device drivers, hardware or software.
Detailed instructions at http://tinyurl.com/yk5zpr
2006-11-27 11:46:52 · answer #5 · answered by Anonymous · 0⤊ 0⤋