I was told to use auto motor oil to remove rust from socket tools.?

Question

How long should I let the tools "soak" in the motor oil?

Answer 1

If the rust is only mild, merely get them wet, then wipe clean, but leave a SLIGHT oil residue for further protection. If the rust has penetrated the chrome or the nitrite coating, it would better serve you to use Naval Jelly according to the instructions on the container. THEN wet them with oil and wipe clean.

Good Luck

Answer 2

Use tranny fluid or hydraulic fluid.Both are mildly caustic but remove rust well Wipe the tools clean & apply a light coat of oil.
If not removed,they can promote rust.
The same applies to "naval-jelly"only,more so.That stuff has to be
thoroughly rinsed off in very hot water,air dried,& then well oiled
on metal.
Reason being,that the naval jelly will actually etch the metal &
occasionally remove chrome plate.

Answer 3

Use a small perspective grinder geared up with a cup-brush, or a hand twine brush in case you at the instant are not used to perspective grinders (they are in a position to be slightly vicious with twine brushes in). as quickly as you're all the way down to flat (yet orange) steel, then you certainly can use a rust converter product like kurust. - something containing Phosphoric acid. this might turn the rust to a sturdy sort of black iron oxide. Paint over the steel with a perfect paint - very virtually any will do. regularly black, pink or blue are used Then use abrasive paper to get rid of the paint from the working faces of the equipment - and circulate away bright steel. be conscious clean laquer over those bits. For previous timber handles - first clean with white spirit and clean rags. Use sandpaper to get rid of splinters or tough edges. Then be conscious boiled linseed oil with a rag. it is going to take 3 coats or greater. Buff off with a dry rag after some days. At this element, you ought to use an excellent wax polish. this sort of end leaves the timber finding previous - yet protects it and forestalls it splitting. additionally perfect for use because it is not slippery like varnish. it is why they apply it to cricket bats.

Answer 4

Oil prevents rust. It does not remove it.

Answer 5

I don't know that it will remove rust, but if you do what you said, it should curb the rust already there. And stop further corrosion as well.

Answer 6

over night, Militec works allot better though

Answer 7

ok, reaky