How do you take a nose screw out?

Question

I totally do not know how to take out a nose screw..I know defintally how to put one in, but it's maing me go into a fit by not knowing how to take it out!! Please help me somebody.

Answer 1

Kinda pull and twist. I can't really describe it well, but you have to get that bend through first so pull that up in then twist out the screw part. It hurts, though, huh? I hate those. I used one once and it was pretty much torture. I also hate the ones with a little ball on the end - they hurt too.

I use the ones you can buy online and bend yourself and just bend a 90 degree angle into them. I believe they are called fishtails. They look like really long ear studs so you bend it where you want and then just snip the extra off the back with a wire clippers (I usually sand that down a little then cuz it is sharp)

Answer 2

Nose Screw Stud

Answer 3

A nose screw is a curved piece of jewellery made especially for nose piercings , it is usually 20 or 18 gauge (: You can change to a nose screw after it's healed , don't change the jewellery before it's healed or you will irritate the piercing. [ x o x ]

Answer 4

Think of how you put it in and reverse the motion. You have to twist it as you pull it out.

Easier said than done, I know. Just relax and take your time and you'll get it out.

For the future I suggest jewelry like nose pins or the push type nose studs. They also have small flat back studs (they look like labret jewelry) for noses that you could use.

Answer 5

u pull on it so the metal thing slides out of you hole just like putting one in and you unscrew the jewlry. same as puttin in but you twist the other way

Answer 6

show him a straw and a lot of coke and hell come out by himself.....................