The only way I know of is taking the axle off but it's a pain in the butt.
2006-11-26 09:41:33 · 4 answers · asked by wendy 3 in Cars & Transportation ➔ Car Makes ➔ Honda
Auto zone has some good info, but require for this model that you disconnect the driveshaft.
Without requiring that, I could only find this:
You do not have to remove the driveshaft. Roll the alternator to the right side of vehicle. Disconnect the bracket holding a water pipe to the firewall and turn the alternater around till you can pull it through all the hoses up and out. Take your time to be shure not to damage the hoses. Disconnect what vacumn hoses you need to and remember where they go.
For better info go to: http://autozone.com/servlet/uibroker?for...
This page gives a very detailed description on how-to, with photos.
It shouldn't be too dificult, but unless you have mechanic experience, you should definitely get a repair manual. Personally, I think the Haynes brand is the best- they have great descriptions, with very good photos. My manual has saved me quite a lot of money on repairs and upgrades on my Civic.
I hope this helps.
2006-11-26 13:20:37 · answer #1 · answered by Si_Pocket_Rocket 3 · 0⤊ 0⤋
If you dont wanna pull the shaft, you can remove the brake master cylinder from the booster ( 2 12mm nuts) but do not disconnect the brake lines. Pull master out gently and move to the side and pull alternator up.( The brake lines have enough flex in them and be careful not to kink the lines )
2006-11-26 22:32:18 · answer #2 · answered by gear head 2 · 0⤊ 0⤋
do it according to the book or blow it out with explosives.
2006-11-26 18:49:10 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Call Linc!! LOL!!!
2006-11-27 10:50:31 · answer #4 · answered by Anonymous · 0⤊ 0⤋