English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

i just want to get a sheet glass for table live in columbus ohio

2006-11-26 03:54:30 · 9 answers · asked by Karla S 1 in Home & Garden Garden & Landscape

9 answers

I would go to the trouble to take it in to a glass sales/repair outlet and let them cut it to the exact size for you. It's not that expensive to have it done right.

2006-11-26 03:59:51 · answer #1 · answered by Anonymous · 0 0

As another mentioned, get "tempered" glass. It may be a bit more expensive but it won't break as easy a regular glass will. And be sure to get it as thick as you table will allow. The heavier the glass the less likely breakage will occur if something is to drop on it or a cup or glass falls over.

2006-11-26 05:47:08 · answer #2 · answered by koko 2 · 0 0

Your area should have a lot of window and glass places check the yellow pages. You can put a sheet of tempered glass usually right at the counter.

2006-11-26 04:42:59 · answer #3 · answered by Tapestry6 7 · 0 0

Look in your yellow pages for glass companies. Someone such as Binswanger Glass could cut a piece to fit. If it is a specialty type of glass, they may need to order it.

2006-11-26 04:04:23 · answer #4 · answered by Flyby 6 · 0 0

Check for window or glass companies near Columbus.
They often have the beveled glass that has the angled cuts at the edges.

2006-11-26 04:02:37 · answer #5 · answered by jpbofohio 6 · 0 0

some auto glass replacement companies may replace glass for you if you bring measurements or better yet the table .i would call around..

2006-11-26 04:01:04 · answer #6 · answered by shawns bonnie 4 · 0 0

Any local glass shop will cut one for you.

2006-11-26 03:56:45 · answer #7 · answered by tadkins16 1 · 0 0

search for a glass and mirror supplier in your area...some may have scrap pieces that they will cut to fit for little or nothing

2006-11-26 03:57:39 · answer #8 · answered by whoamitojudge 2 · 0 0

at any hardware store.
they usually have it in the "construction" section.

hope this helps!!

2006-11-26 03:56:18 · answer #9 · answered by Anonymous · 0 0

fedest.com, questions and answers