the faucet is brand new. did all the troubleshooting and the water still just trickles out. spayer works fine. Please help
2006-11-26 03:43:02 · 5 answers · asked by JJ 1 in Home & Garden ➔ Maintenance & Repairs
it's most likely your aerator but could very well be your diverter is gummed up if the aerator is OK then you need a new diverter call a plumber and have him put a new faucet in pricefister will always cause you problems you will spend more fixing it then just putting in a quality faucet to begin with so in the long run your cheap faucet cost twice as much as a quality product
2006-11-26 04:51:41 · answer #1 · answered by drain-king 2 · 0⤊ 0⤋
The first guy is probably right. Take the aerator off and see if you get full flow. This is just my opinion but I think a faucet that costs about half as much as you paid will work just as good as the high priced brands. One other guess is that a supply tube might be kinked. Good luck
2006-11-26 03:55:16 · answer #2 · answered by brian d 3 · 0⤊ 0⤋
Two of the people here are probably right, the screen on the end is maybe plugged. As long as your this far. The end has a plastic cover water saver that has a water saver in it.It has about ten tiny holes driller in it. Take a 3/8 inch drill and drill this out and make sure you clean out the shavings and try that, you'll like it.
2006-11-26 04:27:17 · answer #3 · answered by cowboydoc 7 · 0⤊ 0⤋
Make sure your water valves are open. Many people think that you open a valve by turning it a complete 360 degrees but that's not so - it should only go 180 degrees or halfway.
2006-11-26 03:51:44 · answer #4 · answered by Anonymous · 0⤊ 0⤋
The screen is plugged at the aerator.
The little thing on the end that unscrews that twater comes out of.
2006-11-26 03:49:32 · answer #5 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋