How are diamonds rated?

Question

what are the characteristics of high quality diamonds and where are the best diamonds mined?

Answer 1

The rating for selection of good diamonds and proper pricing is based on 4 (Four) "Cs" 0- Carat, Clarity, Color, Cut. The significance of these qualities are-

The carat weight measures the mass of a diamond. One carat is defined as a fifth of a gram, or exactly 200 milligrams (about 0.007 ounce). The point unit—equal to one one-hundredth of a carat (0.01 carat, or 2 mg)—is commonly used for diamonds of less than one carat. All else being equal, the value of a diamond increases exponentially in relation to carat weight, since larger diamonds are both rarer and more desirable for use as gemstones. A review of comparable diamonds available for purchase in September 2005 demonstrates this effect

Clarity is a measure of internal defects of a diamond called inclusions. Inclusions may be crystals of a foreign material or another diamond crystal, or structural imperfections such as tiny cracks that can appear whitish or cloudy. The number, size, color, relative location, orientation, and visibility of inclusions can all affect the relative clarity of a diamond. The Gemological Institute of America (GIA) and others have developed systems to grade clarity, which are generally based on those inclusions which are visible to a trained professional when a diamond is viewed from above, under 10x magnification.

A chemically pure and structurally perfect diamond is perfectly transparent with no hue, or color. However, in reality almost no gem-sized natural diamonds are absolutely perfect. The color of a diamond may be affected by chemical impurities and/or structural defects in the crystal lattice. Depending on the hue and intensity of a diamond's coloration, a diamond's color can either detract from or enhance its value. For example, most white diamonds are discounted in price as more yellow hue is detectable, while intense pink or blue diamonds (such as the Hope Diamond) can be dramatically more valuable.

Diamond cutting is the art and science of creating a gem-quality diamond out of mined rough. The cut of a diamond describes the manner in which a diamond has been shaped and polished from its beginning form as a rough stone to its final gem proportions. The cut of a diamond describes the quality of workmanship and the angles to which a diamond is cut. Often diamond cut is confused with "shape."

Based on all the above quallity and price will be determined-

Answer 2

The quality of a diamond's cut is widely considered the most important of the four Cs in determining the beauty of a diamond; indeed, it is commonly acknowledged that a well-cut diamond can appear to be of greater carat weight, and have clarity and colour appear to be of better grade than they actually are. The skill with which a diamond is cut determines its ability to reflect and refract light.

In addition to carrying the most importance to a diamond's quality as a gemstone, the cut is also the most difficult to quantitatively judge. A number of factors, including proportion, symmetry, and the relative angles of various facets, are determined by the quality of the cut and can affect the performance of a diamond. A poorly cut diamond with facets cut only a few degrees out of alignment can result in a poorly performing stone. For a round brilliant cut, there is a balance between "brilliance" and "fire." When a diamond is cut for too much "fire," it looks like a cubic zirconia, which gives off much more "fire" than real diamond. A well-executed round brilliant cut should reflect light upwards and make the diamond appear white when viewed from the top. An inferior cut will produce a stone that appears dark at the center and in some extreme cases the ring settings may show through the top of the diamond as shadows.

Answer 3

Diamonds are rated on the 4 "C's"-------Color, cut, clarity, carat.Talk to any reputable jeweler for a full explanation of these terms.(It helps if he thinks you might be a customer) The most productive diamond mines are in South Africa. The "best" diamonds are equally likely to come from any diamond producing area, even our own Arkansas.

Answer 4

i think that Diamonds are rated according to their clear transparency, the less the bubbles, the higher the value. I believe that the best diamonds is found in South africa

Answer 5

I Dont Think there Is Anyone Who Rates Your Team In Pokemon Daimond And Pearl

Answer 6

A dimond is rated on it's size and i think how clear it is

Answer 7

they are rated by their shining quality and critical angle.

Answer 8

they r rated by the cut.

Answer 9

by the cut yo