The vent that goes on the bottom, the milk leaks right through it. Why is that?? Is there another part that goes to it because I don't have any other parts.
2006-11-25 12:11:42 · 10 answers · asked by Sunset D 1 in Pregnancy & Parenting ➔ Newborn & Baby
The parts are not on wrong. I want to know if something goes over the bottom part(the holes on the vent) so it will not leak through because if there is I don't have that part.
2006-11-25 12:22:49 · update #1
I don't have a filter and what does it look like???
2006-11-25 12:24:59 · update #2
Before the box is open where will the filter be located because I don't see any filter. Is the filter already inside the bottle? Or where is it before it's in the bottle if it isn't already in there?
2006-11-25 12:27:21 · update #3
I use those bottles and I love them. The only parts are the bottle itself, the plastic base, a small plastic filter that goes into the base, and the nipple and the part that holds the nipple in. Is the filter in correctly? If it's in a little crooked or something, it might leak. If everything seems right, maybe you just have a dud bottle.
The filter is a flat, circular, rubber piece that fits into the base. On this page, the 5th picture down shows it if you look closely. (On the "gift set" box) It's on the right half of the box--the little circular thing on the bottom.
http://www.playtexbaby.com/bottlesandpacifiers/products/ventairenaturalshape.asp
2006-11-25 12:23:14 · answer #1 · answered by Jess H 7 · 0⤊ 0⤋
I loved these bottles when i had my daughter and no there not suppose to leak it might not be on right make sure that the hump pat how it bubbles ya know in pointing towards the nipple.. the holes are huge are they have you used this bottle for a while you might need that part new i believe you can bu it i know you can by the nipples for this bottle try messing with it practice with water
2006-11-25 12:15:44 · answer #2 · answered by jlilmama420 2 · 0⤊ 0⤋
Yeah, when I was using those bottles that was usually the reason they were leaking. Just unscrew the bottom and replace that piece. I always had to make extra sure that piece was in place because if not, they would leak badly.
2016-05-23 02:41:17 · answer #3 · answered by Anonymous · 0⤊ 0⤋
I'm not positive, but I think the bottles come assembled with the rubber round filter already in place. If it wasn't there, maybe you got a defective package.
2006-11-25 18:35:27 · answer #4 · answered by Anonymous · 0⤊ 0⤋
you are supposed to have a little plastic "vent" that goes in the bottom of the bottle. if you dont have it positioned right, it will leak.
2006-11-25 12:15:00 · answer #5 · answered by Carrie H 2 · 0⤊ 0⤋
I hate these bottles. they were a pain and I had the same problem, when I did have the bottles the little filter was a pain you had to have it on perfectly.
2006-11-25 13:18:04 · answer #6 · answered by chrisbee 2 · 0⤊ 0⤋
You probably have a defective one. I'd call the manufacturer and get your money back. I used VentAires exclusively with my daughter and never had problems with leakage.
2006-11-25 13:49:03 · answer #7 · answered by gspmommy 3 · 0⤊ 0⤋
No, really, if there's nothing keeping the milk in, you are missing a part, or you didn't assemble it right. Take it back, or fix it.
2006-11-25 12:49:56 · answer #8 · answered by steelypen 5 · 0⤊ 0⤋
I believe those are the ones you have to be sure to not OVER tighten and only use their nipples/tops to them.
2006-11-25 12:14:49 · answer #9 · answered by Melissa J 4 · 0⤊ 0⤋
The diaphram is probably in backwards.
2006-11-25 12:13:54 · answer #10 · answered by amosunknown 7 · 0⤊ 0⤋