WHERE DO I FIND THE FUSE TO SEE IF IT NEEDS TO BE REPLACED
2006-11-25 11:58:49 · 6 answers · asked by Anonymous in Home & Garden ➔ Maintenance & Repairs
Pop the top open, latches are usually on the side, & may need a flat screw driver. There should be a little control panel. You'll need a small needle nose pliers or a fuse changer if handy.
2006-11-25 12:11:23 · answer #1 · answered by kokaneenut 3 · 0⤊ 0⤋
i'm not sure that a dryer has a fuse. My Kenmore is really old and has had the element replace a couple of times. that's what makes the heat. That part is sorta like an oven element but coils and can be ordered from a washer dryer repair place. That's where my husband got ours. good luck.
2006-11-25 20:13:15 · answer #2 · answered by MISS-MARY 6 · 0⤊ 0⤋
Since you have not provided a full and correct model number it would be difficult to provide you with the information you would like. There are as many as three thermal fuses on a Kenmore dryer and they are located in several places depending on the model.
2006-11-25 22:27:46 · answer #3 · answered by Anonymous · 0⤊ 0⤋
I am wondering what is or isn't your dryer doing? Does the drum turn but there is no heat? The element could be bad or if you live in an older house it may of blown one fuse out of the two that may run the circuit the dryer is on. just a thought for you ....
2006-11-25 20:56:16 · answer #4 · answered by clintanjunior 3 · 0⤊ 0⤋
Brandi,Ck on www.RepairClinic.com they should show a picture of where your fuse is located. Good luck.
2006-11-26 11:25:19 · answer #5 · answered by R W 6 · 0⤊ 0⤋
dont believe they have a fuse they may have a thermo device that burns out and its small
2006-11-26 12:14:07 · answer #6 · answered by Anonymous · 0⤊ 0⤋