2006-11-25 09:11:48 · 9 answers · asked by Scott T 2 in Cars & Transportation ➔ Maintenance & Repairs
Probably cheaper to replace the fiesta
2006-11-25 09:13:56 · answer #1 · answered by Jumble 4 · 0⤊ 0⤋
Is it the heater not working or just cold, if just cold is the control on the engine seized up it happens,it should be on top of the head probably at the back,first look at that get someone to play with the controls of the heater on hot and cold to see if its moving.The next one is the thermostat stuck open this will make the engine stay cold for much longer,as the thermostat closes the water system until the engine is warm thus running without the chock faster.You should also check if your heater has an air lock this will also make it blow cold with no water flowing through the heater core.I hope you have checked the heater fuse as well that might of blown,last but not least have you checked the motor with a multimeter to see if the motors ok.
2006-11-25 15:38:37 · answer #2 · answered by restfullone 3 · 0⤊ 0⤋
Ford Fiestas not expensive.
2006-11-25 09:20:29 · answer #3 · answered by Butt 6 · 0⤊ 0⤋
Go to your local `scrap-yard they will have loads of cars there, they take out or off any part that works and scrap what is rubbished. If you can fit it then that's the place to get a heater. I`d `phone them first , as they are often out of town and it may save a wasted journey. For sure you will be able to get one for a fraction of the new price.
2006-11-25 09:26:23 · answer #4 · answered by Social Science Lady 7 · 0⤊ 0⤋
could be a heater valve which is around £40. and the same to fit,very easy job can be done at home i can help you.
2006-11-28 07:00:55 · answer #5 · answered by damian 4 · 0⤊ 0⤋
bin the fiesta or use a candle
2006-11-25 09:19:37 · answer #6 · answered by Anonymous · 0⤊ 0⤋
20 DOLLARS FOR A BRAN NEW HEATER CORE, ABOUT 430 DOLLARS ON LABOR, UNLESS YOU HAVE A MECHANIC FRIEND OR A REAL GOOD FRIEND TO DO FOR YOU
2006-11-25 11:50:13 · answer #7 · answered by CARLOS M 2 · 0⤊ 0⤋
12.99 for a Haynes manual
3.00 for a screwdriver.
50p for some wire
2006-11-25 09:20:22 · answer #8 · answered by Anonymous · 0⤊ 0⤋
Depends what is wrong, could be something simple
2006-11-25 09:20:04 · answer #9 · answered by Glenn M 4 · 0⤊ 0⤋