Hi everyone,
I have a wireless d-link router and I am changing my ISP. I need the password it asks when being installed, and my brother, who installed it the first time, didn't write it down and so now I need to unblock it or get some sort of "master" password...can you help me? Thanks a lot!
2006-11-25 04:42:30 · 7 answers · asked by Barbs-mom of boy 5 in Computers & Internet ➔ Computer Networking
I have a DLink also and am not aware of a master password. I would get a hypnotist and force the password out of his brain. Chinese water torture may also help ;-)
Ok, I found out something myself on this one. There might be a default reset button. Chinese water torture is still fun though....
2006-11-25 04:45:44 · answer #1 · answered by Phil 2 · 0⤊ 0⤋
There should be a "reset" button at the back of the router. Use a pen to push it, and keep it pressed for AT LEAST 30 SECONDS.
Then, cut power to it for 15 seconds, and plug it back.
Then, the password should be as it was by default.
2006-11-25 05:02:26 · answer #2 · answered by Drake 2 · 0⤊ 0⤋
There should be a little button on the router that you can push to reset the modem to its factory default settings. Do a search for your model number if it has a default password.
2006-11-25 04:45:45 · answer #3 · answered by froggman_5555 1 · 0⤊ 0⤋
You can reset your wireless route and configure again. The reset button usually on the back, it looks like a small hole. use something small, press it a moment (while the power on).
2006-11-25 04:45:58 · answer #4 · answered by Anonymous · 0⤊ 0⤋
put in http://192.168.2.1/ click on enter and ignore the request for a password, on the left hand side click wan settings, alter the mtu from 1454 to 1400
2006-11-25 04:50:51 · answer #5 · answered by geaux g 1 · 0⤊ 0⤋
this is 2 different ends of the relationship. the community appears like this: (internet) -- [Modem] - [instantaneous Router] ----(instantaneous signal) ----- [instantaneous gaming adapter] ---- [xbawx (or the different gadget rather)] the instantaneous gaming adapter receives the instantaneous signal from the instantaneous router, and converts that right into a stressed ethernet connection. then you definitely plug the ethernet twine into the gadget and look at were given a connection.
2016-11-26 21:35:43 · answer #6 · answered by schecter 4 · 0⤊ 0⤋
press on the little "reset" button. Then you can use the factory settings.
Usualy, no name and "admin" as password
2006-11-25 04:51:23 · answer #7 · answered by Anonymous · 0⤊ 0⤋