How Do I Burn Rubber In A Automatic Car?

Question

I Want To Knoe How TO How Do I Burn Rubber In A Automatic Car .... i have tried every thing
I Have :
. Put The E-Brakes & Hit THe Gas
.Hold The Brakes & HIt The Gas
.Put The Car in (N) And Hit The Gas & Put It In Drive ( NOT GOOD)
.
Yea DO YOu Knoe How ?

Answer 1

usually you can break torque it,and make it smoke them a little ,but some cars just wont do it ,,no matter what you try,i used to just hold the break,and if you hold it down long enough it should burn some,,good luck,i hope this help,s.

Answer 2

Usually you hold down slightly on the brake and tromp on the gas but hold slightly on the brake. Thats usually how I do it when I am driving a car.

Answer 3

OMG are you dumb your going to break your transmisson doing what you did before. Ok heres what you do make a turn slam the gas if that doesn't work just Slam the gas hit the breaks

Answer 4

Front wheel drive should spin the tires pretty easy unless its a weak engine. Otherwise, you might have to make a sharp turn and floor it which will unload the inside tire and should be easier to spin. Otherwise, you WILL be able to do it when it rains.

Answer 5

you could powerbrake it, meaning carry the brake pedal on, at the same time as accelerating; this might reason the rear tires (or front if front stress) to brake loose and spin. as far as injury, this might do the smallest volume of harm to the motor vehicle, all you're doing is putting a load on the engine sufficiently large to triumph over the grip of the tires.

Answer 6

hold brakes but only enough to keep it from moving to fast while you've got the thing to floor the metal to pedal and yeah

Answer 7

Sounds like your car has about as much power as a Ten-Speed.
Get a faster car.

Answer 8

Remove the tires - pour some gas on them -
light up.

Answer 9

step on the brake and then lrt off of it just alittle bit then step on the gas

Answer 10

I cannot think of reason one to burn rubber. Simmer down, fella.