It said there is an activation code that you need before you work on ignition cylindars, steering columns etc, but the work has been done, I've been rekeyed and the theft lock will not disengage allowing me to drive my car. There has to be a wire or something to disable this feature right??? PLease help me the car has sat in my driveway for 6 mos.
2006-11-24 14:54:12 · 3 answers · asked by leslie p 1 in Cars & Transportation ➔ Car Makes ➔ Chevrolet
A locksmith can help you with this problem.
2006-11-24 15:02:42 · answer #1 · answered by patrick s 1 · 0⤊ 0⤋
The best diagnosis i can give you is its probably the pass-lock sensor disabling the fuel ,If the pcm does not receive the correct password from the pass-lock sensor it will not allow the injectors to turn on. You first need to clear the code that's stored in pcm and bcm.Easy way to do this,tie the pos and neg batt cables together for 10 minute's .reattach cables. turn key to start pos and release leaving key on.Security light should flash for 10 min then quit Its now relearned the sensor. If this does not work then you probably will have to have a new key cyl hsg installed and the same relearn procedure done
2006-11-25 10:06:17 · answer #2 · answered by deltech 4 · 0⤊ 0⤋
Who would steel a Cavalier?
2006-11-25 00:10:17 · answer #3 · answered by CAPTAIN GENIUS !! 5 · 0⤊ 0⤋