English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

A year and a half ago I changed all the spark plugs along with all the connectors for a tuneup.This has just started acting up recently and I just changed the spark plugs and its still stalling.Thanks for your help.

2006-11-24 14:27:00 · 4 answers · asked by pogee2002 1 in Cars & Transportation Maintenance & Repairs

4 answers

need more info .If it only stop when you have it in gear it is in the trans .the lock up torque converter solenoid is bad disconnect it and see if it works then .May need to let car cool after unplugging it to see if it works

2006-11-24 14:41:51 · answer #1 · answered by forgivealot 2 · 0 0

Sounds like a MAP (manifolf absolute pressure) sensor or MAF (mass air flow) sensor fault. Once the engine is warmed, PCM goes to closed loop, the air bypass closes and the pcm is recieving data to compensate fuel to air ratio when not actually required causing the engine to stall.

2006-11-24 15:22:29 · answer #2 · answered by tom_walker86 3 · 0 0

replace the TCC solenoid in the transmission
TCC = Torque Convertor Clutch
The Solenoid is located in the side pan cover not the lower pan. Change the fluid while yout at it

2006-11-24 15:47:25 · answer #3 · answered by Magikmann 4 · 0 0

Sounds like it's time to shoot that horse!!

Or

Check your fuel filter, and/or pcv valve. O2 sensor as well.

2006-11-24 14:36:23 · answer #4 · answered by iiboogeymanii 4 · 0 0

fedest.com, questions and answers