Whats the best way to clean a pipe full of resin?

Question

I want to save it, so no boiling or alcohol.

Is it easier after scraping out the resin to put the resin on a glass plate?

What should I use to clean it out with?

Answer 1

I just scrape it out, put it to the side and when I get a big ball of it I just put it back in and smoke it out. Just use a metal nail file with a pointy tip. That should work fine.

Answer 2

You people shouldnt answer the question if you didnt know the answer . THC burns away as soon as a flame hits it , the main reason a person thinks they get high is simply lack of oxygen to the brain because they hold the resin hit for much longer than an actual mj hit on hopes to get a buzz when the dont have any bud . Also the possibility that maybe a couple flakes sneaked through and got stuck on the inside of the pipe could result in a teaser high and help along your lack of oxygen buzz and therefor putting small amounts of THC in your blood.

Answer 3

start with a paper clip that you unfold and make straight, then clean the bowl with that and use pipe cleaners. If i were you id clean if just a little and leave some resin

Answer 4

its not resin its tar,head ache material,but soak it out in small glass container using alcohol,then set it some were warm until the alcohol evaporates.

Answer 5

use a very small drill bit that fits just right then slowly twist it with your fingers, a very small one, then use the regular pipe cleaners to finish it ..
good luck

Answer 6

pipe cleaners! that's what they are made for:) lol it would help if you get it hot.

Answer 7

POKEMON RED, LEVEL TWO,SCENE SIXTEEN...........WHAT?