2006-11-24 10:48:53 · 8 answers · asked by bigfred1954 4 in Cars & Transportation ➔ Maintenance & Repairs
The best way is with an impact wrench. If you don't have air, or access to it, then your options are limited.
If it is a manual transmission, place the transmission in gear, set the parking brake, and block the wheels. Then use a socket and flex-bar. If it is an automatic, about all you can do is improvise a strap-wrench with a pry-bar and old serpentine belt, and use this arrangement to back up the wrench on the bolt. Be very careful here so that damage is not done to the sensor(s) and the teeth on the front of the engine.
Good Luck
2006-11-24 10:56:53 · answer #1 · answered by Ironhand 6 · 0⤊ 0⤋
With an impact wrench, and a short socket. This will get it right off. It is almost impossible to do it without doing it this way. If you don't have an impact wrench, then use a large screwdriver. Pull the dust cover off the flywheel, and jam the screwdriver in the teeth of the flywheel. You can hold the engine this way while you remove the bolt. If it is a straight drive transmission, you can put it in reverse and remove the bolt using the weight of the vehicle to hold the engine. If you have an automatic, you will have to jam the screwdriver in the teeth of the flywheel around where the started gear is, and have a friend hold it in place while you use a breaker bar and a shot pipe on the bar if you have to.
Glad I could help. Good Luck!!!
2006-11-24 11:16:08 · answer #2 · answered by Anonymous · 0⤊ 0⤋
What in all probability befell is that area of the reamer used to bathe and shape the muse canal substitute into broken off interior the muse of the the teeth. (not the jaw itself.) that may not an uncommon journey whether it generally ability that the muse canal scientific care can't be finished because of the fact the broken device is now wedged interior the canal and blocks the dentist's skill to seal the canal correct. As such, the an infection will by no ability sparkling and the the teeth could ultimately be bumped off. In uncommon circumstances, the broken device manages to seal the muse thoroughly and the the teeth could be saved. In any journey, the dentist could have defined all this to you. related to a lawsuit: it somewhat is ultimate to first bypass back to the dentist who did the muse canal and supply him a raffle to do the the final option difficulty. (i.e., if he particularly did make a mistake, see if he will pay to have the the teeth replaced.) Have him clarify intimately what befell and supply his edge of the story. once you're nonetheless not chuffed, touch the community dental society and request a peer evaluate listening to or mediation. No legal experts are in contact so which you have not any expenditures to pay and any settlement is all yours. This technique additionally leads to a lots speedier decision to the case. some very final issues: did an endodontist or a known dentist do the muse canal? (you have a greater robust case if a known dentist tried to do the muse canal.) Did you sign an suggested consent contract? (i.e., have been you given a itemizing of obtainable undesirable outcomes which coated an device breaking?) if so, it somewhat is a lot tougher to sue. Why have been you traumatized? have been you so frightened as to make it complicated for the dentist to artwork on you? You "in basic terms wanted to get out of there": are you particular the dentist did not clarify the situation thoroughly and it in basic terms did not sign up with you? Did the comparable dentist who did the muse canal additionally pull the the teeth or substitute into yet another dentist in contact? If there is yet another dentist in contact, what's his/her opinion of the situation and could he/she positioned it in writing? i'm hoping this helps.
2016-10-13 01:19:10 · answer #3 · answered by ? 4 · 0⤊ 0⤋
either use an impact wrench or hold the flywheel ring gear with a screwdriver
make sure the nut/bolt isnt bastard threads
2006-11-24 10:54:59 · answer #4 · answered by hillbilly named Possum 5 · 0⤊ 0⤋
impact wrench works best. a breaker bar with a socket will sometimes work if you hit the bar with a hammer,in the loosen direction.
2006-11-24 10:55:33 · answer #5 · answered by Anonymous · 0⤊ 0⤋
most parts stores like pep boys and shucks will rent the right puller for a couple bucks the deposite is steep you get that back when you return puller
2006-11-24 10:59:49 · answer #6 · answered by Bradley B 1 · 0⤊ 0⤋
2 words impact wrench.
2006-11-24 10:59:52 · answer #7 · answered by Les Gramps 5 · 0⤊ 0⤋
Breaker bar propped against the frame, and crank the engine over.
That's what I do.
2006-11-24 11:09:44 · answer #8 · answered by Mr. KnowItAll 7 · 1⤊ 0⤋